1 January 2018 in IEEJ Journal of Industry Applications
Many effective robot-manipulator control schemes using a disturbance observer have been reported in the literature in the past decades. Besides, the disturbance observer combined with the Kalman filter has attracted the attention of researchers in the field of motion control. The major advantage of a motion control system based on the Kalman filter and disturbance observer is the realization of high robustness against disturbance and parameter variations, effective noise suppression and wideband force sensing. This paper presents a survey of motion control based on the Kalman filter and disturbance observer, which have been previously introduced by the authors. Several control schemes, as well as formulations and applications of the Kalman filter and disturbance observer, are described in the paper. The performance and effectiveness of the control schemes are evaluated to give a useful and comprehensive design of the Kalman filter and disturbance observer in various motion control applications.
3 June 2013 in IEEE Transactions on Industrial Electronics
In this paper, a novel force-sensing method is proposed for a high-performance force control system based on friction-free and noise-free force observation. A periodic signal is inserted into the control system for friction reduction. A combination of a high-order disturbance observer (DOB) (HDOB) and a Kalman filter is constructed to perform the force sensing. The HDOB is designed to estimate the force and reject oscillatory disturbances in the estimation. The force-sensing bandwidth is improved through effective noise suppression by the Kalman filter. Additionally, this paper proposes the application of the HDOB to the bilateral control system of a different master-slave mechanism. All the control algorithms are implemented in a field-programmable gate array with a high sampling rate that also enables the widening of the bandwidth of the force control system. The effectiveness of the proposed method is verified by experimental results.
3 December 2018 in IEEE Transactions on Industrial Electronics
This paper proposes a new force estimation approach based on the dither periodic component elimination Kalman filter and the disturbance observer for realization of a fine sensorless force control system under the existence of static friction. A dither signal is inserted to the desired reference signal to eliminate the effect of static friction of a ball-screw system. The disturbance observer estimates the periodical torque caused by dither signal. The dither periodic component elimination Kalman filter uses the periodical torque for the estimation of the high-order torque responses to achieve the torque estimation with the elimination of periodic component. The problem of noise in the force sensation and the effect of static friction are reduced effectively by using the dither periodic component elimination Kalman filter. Therefore, the bandwidth of the force sensing is increased and the wide band disturbance observer is achieved. As a result, this paper has accomplished the fine sensorless force control realization. The force control experiments of a ballscrew system are carried out to verify the validity and effectiveness of the proposed method.
1 January 2016 in IEEJ Journal of Industry Applications
1 January 2015 in IEEJ Journal of Industry Applications
1 January 2011 in IEEJ Transactions on Industry Applications