18 June 2013 in ACS Applied Materials & Interfaces
1 September 2016 in Acta Materialia
20 December 2017 in Scientific Reports
In this investigation, SnAgCu and SN100C solders were electromigration (EM) tested, and the 3D laminography imaging technique was employed forin-situobservation of the microstructure evolution during testing. We found that discrete voids nucleate, grow and coalesce along the intermetallic compound/solder interface during EM testing. A systematic analysis yields quantitative information on the number, volume, and growth rate of voids, and the EM parameter of DZ*. We observe that fast intrinsic diffusion in SnAgCu solder causes void growth and coalescence, while in the SN100C solder this coalescence was not significant. To deduce the current density distribution, finite-element models were constructed on the basis of the laminography images. The discrete voids do not change the global current density distribution, but they induce the local current crowding around the voids: this local current crowding enhances the lateral void growth and coalescence. The correlation between the current density and the probability of void formation indicates that a threshold current density exists for the activation of void formation. There is a significant increase in the probability of void formation when the current density exceeds half of the maximum value.
20 January 2016 in Macromolecular Chemistry and Physics
LLLucien Laiarinandrasana
+1
22 August 2011 in Applied Physics Letters
We performed a rapid diagnosis of electromigration induced void nucleation and growth in Pb-free flip chip solder joints. Quantitative measurements of the growth rate of voids during the stressing by 1.0 × 104 A/cm2 and 7.5 × 103 A/cm2 at 125 °C were conducted by synchrotron radiation high resolution x-ray laminography. The results were analyzed by the statistical model of Weibull distribution function [W. Weibull, ASME Trans. J. Appl. Mech. 18(3), 293 (1951)] of lifetime data. The Johnson-Mehl-Avrami phase transformation theory is proposed to provide a physical link to the statistical model and to estimate the lifetime of the joints at early stages.
1 September 2014 in Applied Physics Letters
Zernike phase contrast in hard X-ray transmission microscopy provides in-line observation of phase enhanced imaging of weak-absorbing objects. However, the inherent artifacts are the major hurdle to acquire quantitative structural analysis, and may even present misleading information. We explore the origin of these artifacts by frequency analysis in Fourier domain. Subsequently, a simple and flexible method for artifacts reduction well-suited for full-field transmission hard X-ray microscopy based on combination of spectra is proposed. It is demonstrated to yield quantitative local phase maps, with the characteristic artifact patterns reduced.