Beijing National Laboratory for Molecular Sciences (BNLMS), Key Laboratory of Bioorganic Chemistry and Molecular Engineering of Ministry of Education, Institute of Analytical Chemistry, College of Chemistry and Molecular Engineering, Peking University, Beijing 100871, China
Auto-generated profile, based on publicly available information
Feng Liu
Beijing National Laboratory for Molecular Sciences (BNLMS), Key Laboratory of Bioorganic Chemistry and Molecular Engineering of Ministry of Education, Institute of Analytical Chemistry, College of Chemistry and Molecular Engineering, Peking University, Beijing 100871, China
A newly developed electrospun nanofibrous film sensor based on tetrakis(4-methoxylphenyl)porphyrin (TMOPP) and polystyrene showed favorable fluorescence sensing performance towards four nitroaromatic explosives. The morphology of nanofibers was uniform with diameters of 300–400 nm. The sensing nanofibrous film possessed satisfactory reproducibility amongst three batches, reversibility with loss of sensing signal only ∼10% after six quenching-regeneration cycles, and selectivity to give minimal response to common interferents. Using amine modification as a new approach and by introducing a porogen, the nanofibrous film sensor exhibited a highly sensitive response towards parts-per-billion levels of 2,4,6-trinitrotoluene vapor, and parts-per-trillion levels of picric acid vapor, respectively. This work provides a facile and promising strategy to construct portable optical devices for nitroaromatic explosive detection.
A self-assembled DNA nanostructure as an efficient signal amplifier was introduced to create a simple and label-free quartz crystal microbalance with dissipation monitoring (QCM-D) biosensing platform for highly sensitive and selective detection of nucleic acids.
3D porous MnO/C anode materials with controllable pore size are rationally designed and synthesized by a facile template-free strategy. The MnxZn1–xCO3 (x = 1, 2/3, 1/2 and 1/3) precursors were prepared by an ultrasonic-assisted co-precipitation method, and then heated with glucose in a reducing atmosphere to obtain a series of MnO/C microspheres through topochemical conversion. These MnO/C microspheres consist of nanosized primary particles and have interconnected pore architectures with high specific surface areas of up to 111.4 m2 g−1. Adjusting the Zn/Mn molar ratio of MnxZn1–xCO3 can easily tune the pore size of the MnO/C materials from 14.9 nm to 31.8 nm. Electrochemical performances of the MnO/C materials were found to be strongly correlated with their porous structures. The MnO/C material with optimized pore size exhibits a high reversible capacity (846 mA h g−1 at 100 mA g−1), superior rate capability (406 mA h g−1 at 3200 mA g−1) and excellent cycling stability. This strategy can be extended to prepare other candidate electrode materials.
18 June 2008 in The Journal of Physical Chemistry B