A bioinspired jumping robot has a strong ability to overcome obstacles. It can be applied to the occasion with complex and changeable environment, such as detection of planet surface, postdisaster relief, and military reconnaissance. So the bioinspired jumping robot has broad application prospect. The jumping process of the robot can be divided into three stages: takeoff, air posture adjustment, and landing buffer. The motivation of this review is to investigate the research results of the most published bioinspired jumping robots for these three stages. Then, the movement performance of the bioinspired jumping robots is analyzed and compared quantitatively. Then, the limitation of the research on bioinspired jumping robots is discussed, such as the research on the mechanism of biological motion is not thorough enough, the research method about structural design, material applications, and control are still traditional, and energy utilization is low, which make the robots far from practical applications. Finally, the development trend is summarized. This review provides a reference for further research of bioinspired jumping robots.
5 February 2018 in Advances in Mechanical Engineering
Rescue robots can replace rescue workers in search and rescue missions in unknown environments and hence play an important role in disaster relief. To realize the advantages of high carrying capacity, easy control, and simple structure to adapt to a complex disaster scene, a novel wheel-legged rescue robot, integrated with rescue function modules, was designed for the present work. Three motion states were analyzed in detail. Mechanical properties were studied to provide basis for parameter optimization. The performance indices, which include mechanical properties, motion amplitudes and movement stability, were proposed, and the structural parameters were further analyzed and optimized based on these performance indices to make the overall performance of the robot achieve the best. Results show that the motion state of the wheel-legged rescue robot can perform real-time transformations and hence can be used in complex environments.
13 August 2018 in Applied Bionics and Biomechanics
Compared with the traditional rigid finger actuator, the soft actuator has the advantages of light weight and good compliance. This type of finger actuator can be used for data acquisition or finger rehabilitation training, and it has broad application prospects. The motion differences between the soft actuator and finger may cause extrusion deformation at the binding point, and the binding forces along nonfunctional direction may reduce drive efficiency. In order to reduce the negative deformation of soft structure and improve comfort, the configuration synthesis and performance analysis of the finger soft actuator were conducted for the present work. The configuration synthesis method for soft actuator was proposed based on the analysis of the physiological structure of the finger, and the soft actuator can make the human-machine closed-loop structure including joints (, 2, 3) meet the requirement of DOF (degrees of freedom). Then the typical feasible configurations were enumerated. The different typical configurations were analyzed and compared based on the establishment of mathematical models and simulation analysis. Results show that the configuration design method is feasible. This study offers a theoretical basis for designing the configuration of finger soft actuator.
Non-contact manipulation technology has extensive application in the manipulation and fabrication of micro/nanomaterials. However, the manipulation devices are often precise and complex, operated only by professionals and subject to site constraints. We propose a simple optoelectronic tweezer platform, which can be controlled remotely and simply for the manipulation of microparticles at different scales, based on the novel manipulation technique called optically-induced dielectrophoresis. In this work, we design and set up the optoelectronic tweezer manipulation platform and develop the full-function human-computer interactive control interface and graphics rendering system to simplify the micro-operation process. Using Qt5.0 development environment, an experimental image processing system with multi-thread characteristics is developed, and the information interaction requirements needed in the experimental operation of optoelectronic tweezers are integrated into a control system to achieve unified information management and data analysis. Combined with cloud computing technology, the system realizes local/remote synchronous linkage operation, with cross-platform operation capability of various portable operating terminals like laptop and iPad.