A miniaturized, flexible fiber-based lithium sensor was fabricated from low-cost cotton using a simple, repeatable dip-coating technique. This lithium sensor is highly suited for ready-to-use wearable applications and can be used directly with-out the preconditioning steps normally required with traditional ion-selective electrodes. The sensor has a stable, rapid and accurate response over a wide Li+ concentration range that spans over the clinically effective and the toxic concentration limits for lithium in human serum. The sensor is selective to Li+ in human plasma even in the presence of a high concentra-tion of Na+ ions. This novel sensor concept represents a significant advance in wearable sensor technology which will target lithium drug monitoring from under the skin.
10 July 2014 in Journal of Chromatographic Science
A stability-indicating micellar liquid chromatographic (MLC) method was developed and validated for the quantitative determination of timolol maleate (TM) in the presence of its degradation products resulting from accelerated degradation in a run time not more than 8 min. TM was subjected to stress conditions of hydrolysis (including alkaline, acidic and thermal hydrolysis) and oxidation. An isocratic, rapid and mobile phase saving the micellar LC method was developed with a BioBasic phenyl column (150 × 1.0 mm, 5 µm particle size) and a micellar mobile phase composed of 0.1 M sodium dodecyl sulfate, 10% of 1-propanol and 0.1% of triethylamine in 0.035 M ortho-phosphoric acid. The flow rate of the mobile phase was 0.1 mL/min. UV detection was adjusted at 298 nm and performed at room temperature. The method has been validated according to the International Conference on Harmonisation guidelines. The method is successfully applied for the determination of TM in bulk powder and pharmaceutical dosage form.