Composite coatings containing aluminum oxide and polyethylene are deposited using microplasma electrochemical anodic treatment of the iron surface in an aluminate bath at a voltage of 260–360 V. Using scanning electron microscopy, microprobe analysis, Fourier transform infrared spectroscopy, and electrochemical polarization measurements, the composition, structure, and corrosion characteristics of the coatings are determined. Adding 0.5–1.0 wt % polyethylene dispersion to the electrolyte is shown to substantially facilitate the origination of microplasma conditions, prevent the strong warming of electrolyte during anodizing, and obtain coatings with substantially higher corrosion resistance compared to those produced in an aluminate bath containing no polymer dispersion.