Andrey Borisovich Kalinin

Andrey Borisovich Kalinin

Auto-generated profile, based on publicly available information

Andrey Borisovich Kalinin

Saint Petersburg State Agrarian University

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 May 2021
Verified
Conference Paper
Closed access
AKAndrei Kalinin
Andrei Kalinin
ITIgor Teplinsky
Igor Teplinsky
VRVycheslav Ruzhev
Vycheslav Ruzhev

10 July 2026 in Научные труды по агрономии
Verified
Journal Article
Closed access
AKAndrey Borisovich Kalinin
Andrey Borisovich Kalinin
ITIgor Zinovievich Teplinsky
Igor Zinovievich Teplinsky
BSBogdan Viktorovich Savenkov
Bogdan Viktorovich Savenkov
Potato storage is the final stage of potato production, largely determining the quality of the product delivered to the consumer. Storing potatoes in containers provides more favorable conditions for phytosanitary safety due to the ability to contain the spread of diseases and promptly remove outbreaks from storage. However, storing products in wooden containers carries the risk of infection lingering within pores and cracks. Therefore, it has been proposed to find an alternative container that ensures the phytosanitary safety of long-term products storage, as well as higher quality preservation indicators. Research has shown that when storing produce in plastic containers, the relative weight loss of potatoes decreased by 1,42% compared to wooden containers due to the better thermal conductivity of the walls and the inability of plastic to absorb moisture from the tubers. Further research is planned to focus on improving microclimate control systems inside storage facilities, taking into account the thermal conductivity of plastic container walls.

21 December 2024 in Tractors and Agricultural Machinery
Verified
Journal Article
Open access
PDF file
AKAndrey B. Kalinin
Andrey B. Kalinin
ITIgor Z. Teplinsky
Igor Z. Teplinsky
INIvan S. Nemtsev
Ivan S. Nemtsev
BACKGROUND: Potato is a crop that requires the preparation of a fine-grained structure of the upper tuber-inhabited soil layer to form tubers of the correct shape, as well as to ensure conditions for good soil separation during harvesting. For this purpose, most technologies for cultivating this crop consider for the formation of a profiled field surface. One of the results of global climate changes is an increase in the frequency of heavy rainfall during the growing season. At the same time, the presence of a profiled surface on fields with even a slight slope leads to significant risks of water erosion during heavy rains due to water flowing from the ridge walls into the row spacing. This leads to annual irreparable losses of the fertile soil layer. Therefore, in order to ensure the preservation of the level of natural soil fertility and to eliminate the risks of water erosion when using intensive potato production technologies in the context of global climate changes, it is necessary to improve the technological methods and technical means used to form a profiled field surface. OBJECTIVE: Protection of soil from water erosion during potato cultivation on a profiled field surface by improving technological methods and technical means used to form a profiled field surface, as well as justification of the parameters and modes of their operation. METHODS: The study object is a non-powered rotary hole-digger mounted on an inter-row cultivator-subsoiler. To select reasonable parameters of working bodies of the hole-digger, theoretical studies were con-ducted on the basis of which the rotor diameter of its vanes was selected. The following assumptions were adopted as initial data for determining the technological parameters of the hole-digger: intensity of downpour; depth of the loosening tines of the row-crop cultivator-subsoiler; the rate of rain absorption by capillaries on medium-loamy soils at a certain degree of field slope. The theoretical calculation of the technological parameters of the hole-digger was performed on the basis of the built paths of the rotor center and its vanes during the working process. The calculation of the parameters of the hole-digger was carried out taking into account that the front and rear walls of a hole are formed by its vane by pushing loose soil during rolling with a step t relative to a fixed point at a certain depth h, the step of the hole-digger’s vanes t is determined by the design parameters of the rotor: diameter D and the number of vanes on it. RESULTS: In order to determine the number of holes per linear meter, the volume of water that gets between the rows during a downpour was calculated depending on their inter-row width. The calculation results showed that with a precipitation intensity of 15 mm/h the number of holes per linear meter of the profiled surface of the field varies from 2.4 to 3.1 pcs/m. These data made it possible to deter-mine the reasonable parameters of the hole-digger for protection against water erosion of the fields located on slopes when cultivating potatoes on the profiled surface. CONCLUSIONS: An effective method for preventing water erosion on the profiled surface of a field when cultivating potatoes is deep loosening between rows with simultaneous formation of holes at the bottom of the furrow. For this purpose, it is proposed to use a non-powered rotary hole-digger. When using a hole-digger with a rotor diameter of 600 mm the number of holes per linear meter varies from 2.4 pcs/m with a inter row spacing of 70 cm to 3.1 pcs/m with a inter row spacing of 90 cm. For reliable protection of soil from water erosion, it is enough to install 4 vanes on the rotor with the inter-row spacing of 70 cm, 5 vanes with the inter-row spacing of 75 and 80 cm, and 6 vanes will be required with the inter-row spacing of 90 cm.

18 June 2026 in Trudy Universiteta
Verified
Journal Article
Closed access
OPOxana Privalova
Oxana Privalova
AKADIL KADYROV
ADIL KADYROV
AKAliya Bakibaevna Kukesheva
Aliya Bakibaevna Kukesheva
AKAkbope Karsakova
Akbope Karsakova
AKAndrey Kalinin
Andrey Kalinin
Methods of snowmelt accumulation as a means of ensuring water security in the Republic of Kazakhstan are considered. The relevance of the topic is justified in the context of limited water resources, transboundary dependence of river flows and climate change. Analytical, predictive and engineering-hydraulic approaches, eco-hydraulic planning and monitoring methods were used. An analysis of threats to water security was carried out, including climate change, anthropogenic impacts and transboundary hydrological risks. The scientific results include the systematization of methods of snowmelt accumulation, the justification of reservoirs, transport infrastructure and engineering equipment to increase the efficiency of water supply and reduce erosion. The practical significance lies in the provision of an integrated approach to sustainable water resource management, increasing water security and adapting to climate change.