Neuromorphic computing, which mimics biological neural networks, is widely regarded as the optimal solution for addressing the limitations of traditional von Neumann computing architecture. In this work, an adjustable multistage resistance switching ferroelectric Bi2FeCrO6 diode artificial synaptic device was fabricated using a sol–gel method with a simple process. The device exhibits nonlinearity in its electrical characteristics, demonstrating tunable multistage resistance switching behavior and a strong ferroelectric diode effect through the manipulation of ferroelectric polarization. One of its salient advantages resides in its capacity to dynamically regulate its polarization state in response to an external electric field, thereby facilitating the fine-tuning of synaptic connection strength while maintaining synaptic stability. The device is capable of accurately simulating the fundamental properties of biological synapses, including long/short-term plasticity, paired-pulse facilitation, and spike-timing-dependent plasticity. Additionally, the device exhibits a distinctive photoelectric response and is capable of inducing synaptic plasticity by light signal activation. The utilization of a femtosecond laser for the scrutiny of carrier transport mechanisms imparts profound insights into the intricate dynamics governing the optical memory effect. Furthermore, utilizing a convolutional neural network (CNN) architecture, the recognition accuracy of the MNIST and fashion MNIST datasets was improved to 95.6% and 78%, respectively, through the implementation of improved random adaptive algorithms. These findings present a new opportunity for utilizing Bi2FeCrO6 materials in the development of artificial synapses for neuromorphic computation.
Pulsed power systems require high-performance capacitors with high energy storage density. In this work, (1 − x)BaTiO3-xBi(Mg1/2Sn1/2)O3 ferroelectric ceramics were synthesized in a solid-state solution. The sample of x = 0.12 (0.88BT-0.12BMS) has excellent energy storage density, wide temperature, and wide frequency stability. The excellent energy density of 4.87 J/cm3 at 315 kV/cm and the energy efficiency of 72% at room temperature for 0.88BT-0.12BMS ceramics were achieved. Furthermore, the 0.88BT-0.12BMS ceramics demonstrated well temperature stabilities in the range of 20–100 °C and very good frequency stability in the range of 1–100 Hz. Through pulsed charging–discharging testing, the current density is calculated as 314.01 A/cm2, and the power density is 21.98 MW/cm3. Moreover, the oxygen vacancies' defects and ferroelectric domain mechanism for enhanced breakdown strength as well as high energy density were discussed. These findings broaden the horizon for lead-free dielectrics and show promising applications for pulse power capacitors.
4 November 2023 in ACS Applied Materials & Interfaces
Negative photoconductive devices exhibit a significant reduction in conductivity under illumination, enabling high-contrast optical modulation and promising great potential in optics. In this study, an ITO/BFCO/TiO2/FTO device was simply fabricated through a synergistic application of sol-gel and magnetron sputtering techniques. Interestingly, the ferroelectric polarization can be reversibly modulated by a low bias voltage in the ITO/BFCO/TiO2/FTO device, thereby exhibiting bipolar voltage dependent reversible behavior of positive and negative photoconductivity. This mechanism has been discussed, where the combined effect of illumination and applied voltage induces internal polarization reversal in Bi2FeCrO6, leading to a transition in the resistance state from low to high. This transition results in an elevation of the energy band, thereby impeding the migration of charge carriers. Additionally, femtosecond laser transient absorption spectroscopy reveals redshift in the initial absorption peak, indicating changes in the band structure induced by illumination, crucial for understanding carrier dynamics in a non-equilibrium state.
Micro glass cavity has very important research values in many fields including Lighting Emitting Diode (LED) packaging, atomic devices, MEMS packaging and so on. In this study, an improved Chemical Foaming Process (CFP) have been investigated and uniform wafer-level micro glass cavities, which could be used in wafer-level LED packaging, have been prepared successfully by the proposed process. First of all, the fabrication process is introduced. Then the prepared uniform wafer-level semispherical glass cavity has been characterized by Atomic Force Microscopy (AFM) and mechanical shock test. And the result shows that the surface roughness of glass cavity is quite smooth which suits for optical applications as well as many other applications. At last, LED chip packaged with semispherical micro glass cavity on silicon substrate is presented.