1 October 2019 in Engineering Failure Analysis
9 June 2019 in Fracture and Structural Integrity
MBMohamed el Amine Bensghier
Mohamed el Amine Bensghier
The variation of crack shape factor (a/c) during propagation has an important role on calculation of the stress intensity factor (SIF), where imprecise estimation of this latter can lead us to an inaccurate prediction of failure probabilities. For the case of external cracked surface pipeline carried oil and gas products, such estimation can results undesired fault decisions like excessive repairs action or inspection planning. In this paper, the structural integrity analysis of pipeline with semi elliptical crack on the external surface is evaluated. Reliability calculations expressed in term of reliability index β are carried out based on Monte Carlo simulation and First Order reliability Method (FORM). The crack shape factors are varied to cover a variety of geometries from shallow to deep cracks while fatigue crack growth is assumed in depth direction. For SIF estimation, surface and deep point are considered. Results of the analysis indicate that for a constant crack depth a/t, the reliability index is strongly affected by a/c ratio and the trend is not similar in deep and surface point for different crack shapes.
1 May 2005 in Materials Science and Engineering: B
11 August 2023 in International Journal of Structural Integrity
Purpose: The aim of this study is to assess the opportunity for the development of hydrocarbon transportation using high-strength steel (HSS) in pipeline construction in terms of cost savings and reliability.Design/methodology/approach: Several optimizations of pipeline design and operations were performed to estimate the total life-cycle cost variation associated with different grades of high-strength steel. The generalized reduced gradient (GRG) method was used in an Excel table to determine optimal total life cycle each pipeline. Variables used in this optimization with respect to each steel grade were as follows: pipeline external diameter, wall thickness, number of compression stations and installed power in each compression station. The reliability of a pipeline with optimal cost was assessed to highlight the impact of steel grade on pipeline reliability.Findings: The study showed that the cost reduction is strongly dependent on the adopted gas pipeline configuration. The number of compression stations and external diameter are the main factors influencing the pipeline total life cycle cost, while the steel price seems to have a minor effect, the reduction of the gas pipeline total life cycle does not exceed 5% even with a 50% difference in pipe steel prices between X70 and X100 steels. On the other side, for the same external diameter, X100 steel presents better pipeline reliability against carbonic corrosion compared to X70 steel.Practical implications: The main contribution of this study is to provide a decision-support tool to help pipeline constructors enhance the profitability of natural gas transmission pipelines. The optimization method used is simple to use for design engineers during a feasibility study.Originality/value: The present study presents one step to fill the gap concerning the question of balancing the trade-off between cost savings and structural reliability in high-strength steel pipelines during the early stages of feasibility studies. The optimal design and operations parameters ensuring cost savings on total life cycle costs are identified via an optimization method. The impact of selected optimal parameters on the long-term pipeline service life was estimated via a structural reliability analysis.
1 January 2012 in Procedia Engineering
Given the distances between areas of production and consumption of hydrocarbons, transport by pipeline is the most competitive means. These pipelines made of metal pipes can contain several types of defects of different origins. These defects can lead to pipeline failures that may have serious consequences resulting in ecological or financial disasters. The causes of these failures can be of various kinds. To assess the integrity and study the ageing of hydrocarbons transport pipelines is a current problem in the world which must be solved. The degraded state of thousands of kilometers of pipeline in the world requires the elaboration of rehabilitation by repair or replacement programs of sections in poor condition. If on one hand rehabilitation operations do improve the safety of hydrocarbons transport pipelines and prolong their remaining life, they are very expensive on the other. Therefore they must be carried out according to a previously well established plan, which determines the priority given. This priority must be defined by a multi-criteria evaluation, which also includes the criterion of severity of the defects located in the pipes metal according to the result of previous inspections of the pipelines towards the importance and the integrity of each section of the pipe.In this context the elaboration of a database and a classification of the defects in the metal of the hydrocarbons transportation pipes according to their severity are essential in this study
27 February 2013 in Mechanics
This present paper describes a method of improving the labyrinth seal design by the development of three-dimensional parametric computer of its model and an analysis of its work for gas pumping units (GPU) using the finite-element method. The authors have improved design labyrinth seal of the GPU according to the criterion of minimum pressure in the last gap by Gauss-Seidel method of optimization, which will increase GPU operational efficiency by reducing flowing medium at various operating modes of GPU. It is shown that change of geometrical sizes and form of creating more compact part of labyrinth seal with inclination them toward greater pressure for an angle of 80º decrease leakages| of gas, that in same time considerably influences on the expense of working environment on the output of labyrinth seal.DOI: http://dx.doi.org/10.5755/j01.mech.19.1.3611