Contemporary climate challenges and energy security issues once again demonstrate that the transition to alternative motor fuels is a key and priority task for ensuring sustainable development in European Union countries, as well as in Ukraine. This review provides a comparative analysis of the physical, chemical, and performance properties of biodiesel fuels derived from 17 lipid-based feedstocks, including vegetable oils, animal fats, food industry waste, and microalgae. This study investigates the influence of fatty acid composition and transesterification alcohol type on key fuel properties, including density, viscosity, cetane number, pour point, heat value, and flash point. The results show that biodiesel fuels with a high content of saturated fatty acids exhibit higher cetane numbers and energy content, while biodiesel fuels with a high content of unsaturated fatty acids possess improved viscosity and cold flow properties. Camelina, rapeseed, and used cooking oil are identified as being particularly promising feedstocks based on their performance and availability in the European and Ukrainian dimensions. These findings are supported by a SWOT analysis and cost–benefit comparison, providing practical insights into the feasibility and scalability of biodiesel production pathways.
The growing demand for sustainable and environmentally friendly fuels and the increasing need to diversify energy sources have stimulated significant research in the field of renewable motor fuels. Despite the progress made, there is still a need to expand the feedstocks, optimize technological pathways, and, in particular, conduct comprehensive studies of the compatibility of renewable components with traditional fuels. In light of the above, the authors propose optimizing the properties of renewable fuels by using new vegetable oils and alcohols for their synthesis. The work is focused on studying the basic physical–chemical properties of fatty acid esters and assessing the possibility of using them as renewable components of motor fuels. Renewable components were obtained via the esterification of selected plant oils (rapeseed oil, camelina oil, palm kernel oil, and coconut oil) with different alcohols (ethanol and isobutanol) with further vacuum distillation of esters. The influence of the structure and composition of renewable components on their physical–chemical properties was studied and substantiated. It shows how the carbon number distribution and double bonds in fatty acid radicals influence the properties of renewable components. The paper shows the impact of the type and structure of alcohol used for esterification on the properties of studied products. The regularities in the change in properties of renewable components depending on the composition of oils and alcohols are explained and substantiated from the point of view of physical chemistry and the basics of forces of intermolecular interactions. Renewable components were compared to the properties of conventional motor fuels (diesel fuel and jet fuel). Based on the level of component compatibility with petroleum fuels, recommendations for replacing or blending petroleum fuels with renewable components were proposed.
27 February 2023 in Eastern-European Journal of Enterprise Technologies
This paper gives a solution to the problem of improving a solid waste management system through the integration of two systemic methodologies: material flow analysis and life cycle assessment. The proposed method serves to assess the effectiveness of the implementation of various waste management measures. The study was carried out with the detailing of the anaerobic digestion process since it is this recycling technology that plays a key role in reducing the amount of waste along with the production of renewable energy and in reducing the adverse effects on the external environment. Simulation of changes in waste properties in a certain processing sequence was carried out in order to obtain reliable information for further optimization of the system. The proposed modeling of waste treatment processes based on their constituent equations made it possible to adequately reflect the impact of changes in working conditions on all subsequent output flows. The analysis of material flows for an enterprise of mechanical and biological treatment of waste is presented and the use of the model in the context of the process of anaerobic digestion of household waste is illustrated. It was found that anaerobic digestion potentially makes it possible to obtain 4.1 Gj of biogas energy from 1 HSW, which corresponds to 460 kWh of electricity and 2060 MJ of heat. The developed method is based on a combination of analysis of material flows and life cycle assessment. The method acts as a tool for comparing alternative technologies and waste management scenarios. In the future, it can serve to support waste management decisions at both the strategic and operational levels
30 June 2023 in Eastern-European Journal of Enterprise Technologies
The object of research is the process of using a hydrogen fuel cell to generate and accumulate electricity. The study highlights the feasibility of using a hydrogen fuel cell to provide electrical load. The potential of using hydrogen as an alternative energy source was evaluated. SWOT analysis was used as a research method, based on the results of which recommendations were developed. The proposed measures could be taken to increase the use of hydrogen energy as an alternative to traditional energy sources. The use of hydrogen technologies in an administrative building connected to an existing electrical network was analyzed. The economic and environmental aspects of the use of hydrogen fuel cells to meet the demand for electrical load were investigated. Six schemes of energy supply of the building and comparing them to select the optimal solution have been developed. In the study, the assessment tool was the Hybrid Optimization of Multiple Energy Resources (HOMER) software. The considered schemes were evaluated in accordance with a single generalized indicator. As a result, it was determined that the use of a hydrogen fuel cell could increase the efficiency of the traditional system by 85 %. For renewable energy systems, there was an increase in efficiency of 7 % (for the wind generator) and 10 % (for the photocell). The practical use of the results will contribute to the efficiency of the process of electricity production by equalizing the stability of energy supply in hybrid systems. The economic and environmental assessment conducted demonstrates the prospects of using a hydrogen fuel cell. This assessment is designed to strengthen consumer confidence in the use of hydrogen fuel cells and hydrogen in general
29 December 2021 in Eastern-European Journal of Enterprise Technologies
This paper reports an analysis of current issues related to storing solid household waste, and, specifically, the problem of environmental pollution when unsorted solid household waste (SHW) is ignited. A technology has been developed to improve environmental safety and ensure a reduction in the anthropogenic load on the atmosphere, hydrosphere, and lithosphere in the event of fires at the sites of solid waste storage. The operation of the proposed equipment, taking into consideration all the provided operating modes and additional options, is energy-saving and automated (or semi-automatic), which makes it especially relevant under modern conditions. The technology significantly improves the efficiency of the processes to eliminate the ignition of SHW and localize their environmental consequences for the territories adjacent to landfills. Laboratory tests were carried out, which proved the effectiveness of practical application for the designed equipment of a new environmentally active adsorption mixture for the purpose of cleaning the waste filtrate, as well as its use for the formation of an anti-filtration screen in the mound of SHW. Experiments have shown that the tested sample of the aqueous suspension of the proposed environmentally active mixture adsorbs calcium (by 92 %), overall iron (by 91 %), overall phosphorus (by 75 %), zinc (by 31 %), and ammonium (by 19 %). This leads to a decrease in the overall toxicity of the solution and indicates the possibility of improving the environmental safety of waste fires when operating the proposed technical solution by purifying the filtrate released during fires in landfills. The reported results, specifically, the technology for localizing the environmental consequences of uncontrolled waste ignition could be used in the process of modernizing the technical support for sanitary treatment schemes in urban areas.