23 July 2018 in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
Extensive development of micro/nano-electromechanical systems (MEMS/NEMS) has resulted in technologies that exhibit excellent performance over a wide range of applications in both applied (e.g. sensing, imaging, timing and signal processing) and fundamental sciences (e.g. quantum-level problems). Many of these outstanding applications benefit from resonance phenomena by employing micro/nanoscale mechanical resonators often fabricated into a beam-, membrane- or plate-type structure. During the early development stage, one of the vibrational modes (typically the fundamental mode) of a resonator is considered in the design and application. In the past decade, however, there has been a growing interest in using more than one vibrational mode for the enhanced functionality of MEMS/NEMS. In this paper, we review recent research efforts to investigate the nonlinear coupling and energy transfers between multiple modes in micro/nano-mechanical resonators, focusing especially on intermodal coupling, internal resonance and synchronization. This article is part of the theme issue ‘Nonlinear energy transfer in dynamical and acoustical systems’.
12 April 2010 in Nano Letters
1 August 2012 in International Journal of Solids and Structures
26 January 2021 in Microsystems & Nanoengineering
Exploiting nonlinear characteristics in micro/nanosystems has been a subject of increasing interest in the last decade. Among others, vigorous intermodal coupling through internal resonance (IR) has drawn much attention because it can suggest new strategies to steer energy within a micro/nanomechanical resonator. However, a challenge in utilizing IR in practical applications is imposing the required frequency commensurability between vibrational modes of a nonlinear micro/nanoresonator. Here, we experimentally and analytically investigate the 1:2 and 2:1 IR in a clamped–clamped beam resonator to provide insights into the detailed mechanism of IR. It is demonstrated that the intermodal coupling between the second and third flexural modes in an asymmetric structure (e.g., nonprismatic beam) provides an optimal condition to easily implement a strong IR with high energy transfer to the internally resonated mode. In this case, the quadratic coupling between these flexural modes, originating from the stretching effect, is the dominant nonlinear mechanism over other types of geometric nonlinearity. The design strategies proposed in this paper can be integrated into a typical micro/nanoelectromechanical system (M/NEMS) via a simple modification of the geometric parameters of resonators, and thus, we expect this study to stimulate further research and boost paradigm-shifting applications exploring the various benefits of IR in micro/nanosystems.
1 April 2018 in Sensors and Actuators A: Physical
21 November 2014 in Journal of Applied Physics
We report thermal to electrical energy conversion from a 150 nm thick BaTiO3 film using pyroelectric cycles at 1 kHz. A microfabricated platform enables temperature and electric field control with temporal resolution near 1 μs. The rapid electric field changes as high as 11 × 105 kV/cm-s, and temperature change rates as high as 6 × 105 K/s allow exploration of pyroelectric cycles in a previously unexplored operating regime. We investigated the effect of phase difference between electric field and temperature cycles, and electric field and temperature change rates on the electrical energy generated from thermal-electrical cycles based on the pyroelectric Ericsson cycle. Complete thermodynamic cycles are possible up to the highest cycle rates tested here, and the energy density varies significantly with phase shifts between temperature and electric field waveforms. This work could facilitate the design and operation of pyroelectric cycles at high cycle rates, and aid in the design of new pyroelectric systems.