We have investigated systematically the x-ray spectra in elements from Ca to Ge within Berger's two-Lorentzian functions model, using a high-resolution antiparallel double-crystal x-ray spectrometer, in order to obtain in detail the physical meaning of the asymmetry in the spectral profiles. The overall tendency of the corrected full width at half maximum of the and lines as a function of , as well as the linewidths, are in good agreement with the data reported in the literature. It is found, from both the experiments and calculation, that satellite lines arising from shake-off appear between the and lines. The asymmetry index of in elements from Sc to Zn is ascribed to the existence of a spectator hole. Moreover, the observed Sc line shows a symmetric profile unlike the Ti line profile, this discrepancy being explained by the existence of satellite lines on both sides of the Sc profile. Our experimental results yielded around 25% probability for the probability of shake processes creating a second hole in the or subshells in Sc and around 18% probability for creating a second hole the in the in Ca. For the latter process our calculated value, using multiconfiguration Dirac-Fock wave functions and the sudden approximation yielded a 10% probability.
The x-ray spectra of the elements from Ca to Ge have been systematically investigated using a high-resolution antiparallel double-crystal x-ray spectrometer. Each natural linewidth has been corrected using the instrumental function of this type of x-ray spectrometer, and the spin doublet energies have been obtained from the peak position values in x-ray spectra. For all studied elements the corrected x-ray lines FWHM increase linearly as a function of . However, for x-ray lines this dependence is generally not linear in the case of elements but increases from Sc to Co elements. It has been found that the contributions of satellite lines are considered to be shake processes. Our theoretically predicted synthetic spectra of Ca, Mn, Cu, and Zn are in very good agreement with our high-resolution measurements, except in the case of Mn, due to the open-shell valence configuration effect (more than 7000 transitions for diagram lines and more than transitions for satellite lines) and the influence of the complicated structure of the metallic Mn.
The optical constants of boron nitride (BN) films on Si substrates were systematically investigated using spectroscopic ellipsometry. BN films with a wide variety of atomic compositions (B/N ratios) and bonding phases (sp2/sp3 ratios) were synthesized using a reactive plasma-assisted coating method, which consists of magnetically confined vacuum-arc discharge and electron-beam evaporation. A wide range of optical constants were assigned to various BN films via a model fitting procedure employing the Tauc–Lorentz optical model. The estimated film thicknesses corresponded with those determined using scanning electron microscopy. The optical constants of the films were found to be significantly dependent on their respective atomic compositions, which shows a transition from the semiconducting to the insulating phase in BN films in response to the deposition conditions. Ion bombardment during the film growth induced an increase in the refractive index along with an increase in the amount of the sp3 phase. Furthermore, the extinction coefficient increased substantially in the ultraviolet region in response to the generation of defects in the BN nano-network structures.
X-ray lines from photon excitation were measured in selected elements from Mg to Cu using a high-resolution double-crystal X-ray spectrometer with a proportional counter, and the intensity ratio for each element was obtained, after correcting for self-absorption, detection efficiency, and crystal reflectance. This intensity ratio increases rapidly from Mg to Ca but, in the elements region, the increase becomes slower. This is related to the intensity of the line involving valence electrons. The slow increase of this ratio in the elements region is thought to be due to the correlation between and electrons. Moreover, the chemical shifts, FWHM, asymmetry indices, and intensity ratios of the Cr compounds, due to different valences, were also investigated using the same double-crystal X-ray spectrometer. The chemical effects were clearly observed, and the intensity ratio was found to be compound-dependent for Cr.
13 June 2022 in Japanese Journal of Applied Physics
Boron nitride (BN) films with a wide variety of nano-network structures ( sp2 and sp3 bonds) were prepared using a reactive plasma-assisted coating technique, and their sputtering behavior was investigated. Fourier transform infrared spectroscopy (FTIR) and nanoindentation analyses confirmed the presence of sp2 - and sp3 -bonded phases. Subsequently, the thickness change after plasma exposure was studied for various BN films. The sputtered depth of the prepared BN films after plasma exposure was shallower than that of the SiO 2 films. While no clear change was observed in the FTIR spectra, the leakage current and dielectric constant changed significantly owing to the surface modification during plasma exposure. The modified layer underneath the sputtered surface contained local defects that acted as carrier trapping or hopping sites. Sputtering behavior analysis, in combination with electrical measurements, is a useful methodology for designing a wide variety of BN films.
Hexagonal boron nitride (h-BN) is a promising material for designing future electronic devices because of its superior dielectric properties. In this study, we fabricated bulk h-BN (sp2-bonded BN nano-network structure) on Si substrates using magnetically confined arc discharge plasma under various conditions. The effects of process gas conditions (Ar/N2 and N2) and impurity [tungsten (W)] incorporation were discussed. Regardless of the gas conditions, the presence of W atoms was found to significantly modulate the optical energy gap, which is supported by first-principles calculations. We investigated time-dependent dielectric breakdown (TDDB) mechanisms under constant voltage stress (CVS) and constant current stress (CCS). The time evolutions of the leakage current and the applied gate voltage during the TDDB measurements were analyzed to clarify the carrier-trapping and defect-generation mechanisms toward the final catastrophic dielectric breakdown. The field acceleration factors in the CVS-TDDB lifetime prediction fell within the general trend of SiO2-based films and were found to be a weak function of the gas condition and W concentration (CW), whereas the carrier-trapping and defect-generation dynamics during electrical stress depend on the gas conditions and CW. Based on the obtained results, we propose a prediction model for bulk h-BN degradation dynamics during CVS. We found that carrier trapping into preexisting sites and the probability of defect generation were enhanced by the bombardment of ions with higher energy during the bulk h-BN formation and a larger number of incorporated W atoms. These findings provide fundamental guidelines for the reliability assessment of bulk h-BN films for various applications.