Generation of ultra-wideband microwave utilizing a low-energy-triggered bulk gallium arsenide (GaAs) avalanche semiconductor switch with ultrafast switching is presented. The switch biased at 5.2 kV is able to reach the conducting state with a time as low as ~200 ps, and a 5.6-nJ laser is required. The switching transient features such as delay, ultrafast switching, and voltage locking are described and explained by multiple powerful avalanche domains, and a comparison with previous discussions and findings available in the literatures is provided. The application of the bulk GaAs avalanche semiconductor switches for generating ultra-wideband microwave is demonstrated. We produce a bipolar pulse with peak-to-peak voltage amplitude of ~5 kV and a unipolar pulse with peak amplitude of ~10 kV.
23 March 2021 in IEEE Transactions on Electron Devices
The transient performance of gallium arsenide (GaAs) photoconductive semiconductor switches (PCSSs) triggered by laser diodes (LDs) at nano-joules (nJ) energy is of great significance for the potential high-power applications at high repetition rates. An opposed-contact GaAs PCSS with Ni/AuGe/WTi/Au electrodes is presented at single-shot and 1-kHz excitation. The influences of bias electric field up to 80 kV/cm on nonlinear characteristics are investigated quantitatively with a carriers’ avalanche multiplication factor as high as $0.8\times 10^{{4}}$ . The effect of electric field on the carriers’ dynamic process and thermal accumulation in repetitive operation is analyzed. The transient electric field distribution is demonstrated by an ensemble Monte Carlo simulation.
To explore the stability of gallium arsenide (GaAs) photoconductive semiconductor switches (PCSSs) with avalanche multiplication mechanism, an interdigitated electrode structure is presented at 1-kHz excitation by a femtosecond laser. The influences of optical excitation and bias electric field on switching characteristics are investigated. The transient current density and the distribution of electric field are demonstrated by the Monte Carlo simulation. The repetitive switching indicates that the avalanche multiplication mechanism could persist stably at 1-kHz repetition rate operation with this specific electrode structure.
An all solid-state high repetitive sub-nanosecond risetime pulse generator featuring low-energy-triggered bulk gallium arsenide (GaAs) avalanche semiconductor switches and a step-type transmission line is presented. The step-type transmission line with two stages is charged to a potential of 5.0 kV also biasing at the switches. The bulk GaAs avalanche semiconductor switch closes within sub-nanosecond range when illuminated with approximately 87 nJ of laser energy at 905 nm in a single pulse. An asymmetric dipolar pulse with peak-to-peak amplitude of 9.6 kV and risetime of 0.65 ns is produced on a resistive load of 50 Ω. A technique that allows for repetition-rate multiplication of pulse trains experimentally demonstrated that the parallel-connected bulk GaAs avalanche semiconductor switches are triggered in sequence. The highest repetition rate is decided by recovery time of the bulk GaAs avalanche semiconductor switch, and the operating result of 100 kHz of the generator is discussed.
The authors present an experimental study of recovery time of a bulk gallium arsenide (GaAs) avalanche semiconductor switch that operates in low‐energy‐triggered mode. The voltage‐biased bulk GaAs avalanche semiconductor switch is first triggered to be in a conducting state by a laser pulse, and then the other biased voltage is applied without laser triggering after a delay time. The self‐breakdown will be observed experimentally in the bulk GaAs avalanche semiconductor switch by reduction of the delay time, and the recovery time can be achieved accordingly. When the biased voltage of the 0.625 mm thickn switch decreases from 5.0 to 2.0 kV the recovery time reduces from ∼4.4 to ∼1.3 µs.
Ultra-wide spectrum (UWS) pulser, in which avalanche transistor is used as its switch, can generate high-repetition and -stability short-pulse, but its power is sharply lower than that of SOS and Tesla generators. Marx circuit is used to increase the power of this type of pulser. Different charged-capacitance and class of Marx circuit determines different waveform and peak-power of output pulse. 20-class and 30-class avalanche transistor Marx circuit pulsers are designed, and the charged-capacitance is 100 pF and 470 pF, then 4 types of waveform are get. The highest output peak-voltage is 2.9 kV, the highest repetition can reach 70 kHz, and keep a better pulse stability, jitter is less than 40 ps.