The enhancement of plasma generation in atmospheric pressure dielectric barrier discharge (DBD) is gaining increasing interest for various plasma applications. In this paper, the effect of surface charges moving with the rotating dielectric plate on improving the generation of streamer channels is investigated by a statistical analysis of electrical measurements, optical diagnostics, and numerical simulation in a needle-plate DBD device with a rotating dielectric plate. Results suggest that rotating the dielectric plate can improve the spatiotemporal distribution of streamer channels by inducing a bending of the streamer channels and an increase in the number of discharges. Statistical results show that the number of current pulse and discharge energy are increased by 20% and 47%, respectively, at the rotating speed of 160 rps (revolution per second). Based on the interaction between the applied electric field and the electric field induced by surface charges, a formula is proposed to govern the effect of rotating the dielectric plate on the discharge energy and streamer bending. To further understand the mechanism of the influence of rotating the dielectric plate on plasma properties, a 2D fluid model is implemented, and the reduced electric field and streamer propagation are analyzed. Results show that the effective transfer and reuse of surface charges play an important role in the enhancement of plasma generation.
We report a square superlattice pattern with discharge holes due to direction-selective surface discharges (SDs) in a dielectric barrier discharge system for the first time. The instantaneous images with an exposure time of 10 μs (half cycle of voltage) taken using a high-speed video camera show that the directions of surface discharges (SDs) of the small spots are selective, which are different from the directions of SDs of the large spots diffused in all directions. In each positive half cycle of voltage, the graphs captured using an intensified charge-coupled device show that the large spot discharges after the small spots and locates at the center of the square formed by the SDs induced by small spots but not their cross point. In each negative half cycle of voltage, the large spots discharge before the small spot and press the SD of the small spot to stretch along the midperpendicular of two adjacent large spots. In a word, the direction-selective surface discharges play a crucial role for the formation of the pattern with the discharge holes in the dielectric barrier discharge system.
We present the triangular lattice pattern with the invisible Kagome lattice in the dielectric barrier discharge system with two water electrodes for the first time. The spatio-temporal dynamics studied by an intensified charge-coupled device (ICCD) show that the complex pattern is composed of four different sublattices: Kagome lattice, halos, and big and small spots (B and S). The invisible Kagome lattice is similar to the dark discharge because of its spatio-temporal randomness. Based on the novel discharges (B and S) occurring at the falling edge of applied voltage, the dynamics of surface charges is investigated and demonstrated with a high speed video camera and photomultiplier tubes. Furthermore, the formation of restricted random structures is considered to be the effect of previous discharges which rearrange the surface charges.