30 September 2024 in Научный журнал "Вестник Актюбинского регионального университета имени К. Жубанова"
This article discusses the methods of recycling high-carbon ferrochrome metal powder by self-propagating high-temperature synthesis. The article is devoted to the study of aspiration metal dusts formed during the production of ferroalloys. The article analyzes the composition of the source material, its physicochemical properties, and the impact on the testing process. The publication touches upon the relevance of this topic and the advantages of the self-propagating high-temperature synthesis method. Particular attention was paid to comparative analyses of this method from other traditional material processing processes. This article will help to consider the problem of environmental pollution and the impact of traditional metallurgical processes on the ecosystem. The authors also analyze in detail the physical properties of the original powder samples and their combustion temperature mode. The publication shows the process flow charts, laboratory devices, and the type of resulting material. This article provides a detailed analysis of the types of laboratory devices, their physical and mechanical properties. The publication provides a thorough and detailed chemical analysis of the resulting material. In the course of the study, the expected results were obtained, which are presented in the form of tables and a figure. The article consists of an introduction, main part, conclusion, conclusion and list of references.
28 October 2026 in Izvestiya. Ferrous Metallurgy
The paper presents the results of research on development of a new alloy for processing steel melt with calcium. The resulting material is an alloy based on the higher calcium silicides CaSi, Ca 5 Si 3 and Ca 2 Si and contains 50 – 75 % Ca. The distinctive properties of such high-percentage silicocalcium are its high melting point and high oxidation resistance. Industrial tests of the new alloy during the treatment of steel melt with calcium before casting at the casting plant showed an almost complete absence of pyroeffect. The degree of calcium absorption was 15 – 20 %, with a calcium content of 0.0015 – 0.0030 % at the continuous casting machine (CCM). The cost of calcium treatment of steel is reduced by 1.5 – 2.0 times compared to traditional materials. The SHS technology of a new high-percentage silicocalcium of the SiCa60 grade was developed, which makes it possible to synthesize an alloy with a strictly specified calcium content using powders and/or granules of calcium and silicon as raw materials with minimal energy consumption. The authors developed the design of cored wire with SiCa60 filler. Composition of the new cored wire is characterized by a maximum content of calcium and a minimum of ballast materials. The use of cored wire with a new filler significantly reduces the consumption of calcium-containing material and reduces the duration of melt treatment.