11 June 2019 in Journal of the Optical Society of America A
The thermal blooming effect of Hermite–Gaussian (H-G) beams propagating through the atmosphere is studied analytically and numerically. The analytical expression for the distortion parameter of steady-state thermal blooming of H-G beams propagating through the atmosphere is derived. It is shown that, under the same beam power, the higher the mode order of H-G beams, the weaker the thermal blooming effect. In particular, the thermal blooming effect for a H-G beam is weaker than that for a Gaussian beam. It is found that as the mode order increases, the beam width at the target may decrease due to the thermal blooming effect, although the initial beam width increases. When the cross-wind velocity is large enough, the symmetry of an asymmetric H-G beam may be improved by thermal blooming if the astigmatism parameter is adopted to characterize the symmetry of H-G beams. As the mode order of H-G beams increases, the shift of the beam centroid position decreases, but it takes more time to reach steady-state thermal blooming. On the other hand, the thermal blooming effect on the multimode beam quality is also examined in this paper. It is shown that a minimum beam spot on the target can be obtained if the optimal weighting factor of multimode beams is adopted.
1 October 2011 in New Journal of Physics
6 May 2019 in Optics Express
The uniform irradiation generated by beam self-focusing in the inhomogeneous atmosphere is studied. It is found that the uniform irradiation may appear on propagation of an initial flat-topped beam from the ground to space orbits because of the phase modulation caused by self-focusing in the inhomogeneous atmosphere. This may offer a way to achieve the uniform irradiation under the effect of inhomogeneous nonlinearity. The uniform irradiation on the target is interesting for the laser space-debris clearing. To achieve the uniform irradiation on the debris target, we present the fitting formula of the modified focal length, which presents an effective design rule for the uniform irradiation on the debris target. In addition, the influence of the beam order on the beam quality due to self-focusing is also investigated.
1 June 2010 in Optics & Laser Technology