16 June 2010 in Physical Review D
The SciBooNE Collaboration reports a measurement of neutral current coherent production on carbon by a muon neutrino beam with average energy 0.8 GeV. The separation of coherent from inclusive production has been improved by detecting recoil protons from resonant production. We measure the ratio of the neutral current coherent production to total charged current cross sections to be . The ratio of charged current coherent to neutral current coherent production is calculated to be , using our published charged current coherent pion measurement.
4 February 2010 in Physical Review D
The SciBooNE Collaboration reports inclusive neutral current neutral pion production by a muon neutrino beam on a polystyrene target (). We obtain as the ratio of the neutral current neutral pion production to total charged current cross section; the mean energy of neutrinos producing detected neutral pions is 1.1 GeV. The result agrees with the Rein-Sehgal model implemented in our neutrino interaction simulation program with nuclear effects. The spectrum shape of the momentum and angle agree with the model. We also measure the ratio of the neutral current coherent pion production to total charged current cross section to be .
30 January 2014 in IEEE Transactions on Nuclear Science
It is important to control the magnet current for a high-intensity proton beam because the magnetic field error displaces the beam parameters (i.e., center of orbit, transverse tune, etc.) from the ideal values and such displacements cause severe beam loss. This issue is much more severe for synchrotrons because the magnetic field must be changed for acceleration. For more precise control of the power supplies, we developed low-noise 24-bit A/D boards for high-precision current measurement. In addition, we developed an algorithm and DSP boards to correct the current deviation. We successfully controlled the magnet current at a level of ppm for all frequencies using sextupole magnets in the J-PARC MR. In this paper, the details of the control system and results of the tests using the magnets in the synchrotron are described.
25 January 2016 in IEEE Transactions on Applied Superconductivity
Particle accelerators consist of an enormous number of components and many of them operate with pulse voltage or current. Such accelerator components require precise voltage or current to keep the beams very stable. For this reason, many pulse power supplies used for accelerators have own subsystems to improve their performances. One example is a power supply for the scanning magnets of a pencil beam proton therapy. They use not only high-voltage inverters for the high-speed ramping but also low-voltage inverters for the precise current control. However, the use of intelligent digital controllers possibly simplifies such precise power supplies. We propose a method for precise current control using a digital control system. Our previous work has successfully controlled the pulse current of power supplies for synchrotron main magnets. In the next step, we have modified our previous method for faster power supplies such as ones for scanning magnets. In addition, we developed a control board using a high-performance FPGA so that our method can be implemented in the board. In this paper, we describe the details of our proposed method, and the experiments using a small-scale power supply and the developed control board.
17 July 2019 in Physical Review Accelerators and Beams
In the main ring (MR) of the Japan Proton Accelerator Research Complex (J-PARC), the power supplies of magnets induce large ripples in the betatron tunes. The tune ripples degrade the quality of the beam spill on the slowly extracted beam. To improve the spill quality, the J-PARC MR employed a feedback system using a beam spill monitor; however, the existing system could not correct the beam spills suitably, since the tune ripples were too large. We developed a new correction system using the information of magnet currents as an input of the correction. The new system consists of current monitors and a corrector quadrupole, and it allows us to correct the ripples in real time. Using this system, we successfully corrected the tune ripples for the first time in the J-PARC MR. The correction system improved the spill quality from 3% (without any correction) to 30% (with the new correction), whereas the quality using the present feedback system is 17.4%.
1 December 2016 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment