Liran Zheng

Liran Zheng

Auto-generated profile, based on publicly available information

Liran Zheng

School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA, USA

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 January 2022 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
LZLiran Zheng
Liran Zheng
AMAniruddh Marellapudi
Aniruddh Marellapudi
VCVikram Roy Chowdhury
Vikram Roy Chowdhury
NBNishant Bilakanti
Nishant Bilakanti
RKRajendra Prasad Kandula
Rajendra Prasad Kandula
DDDeepak Divan
Deepak Divan
Solid-state transformer (SST) and hybrid transformer (HT) are promising alternatives to the line-frequency transformer (LFT) in smart grids. The SST features medium-frequency isolation, full controllability for voltage regulation, reactive power compensation, and the capability of battery energy storage system (BESS) integration with multiport configuration. The HT has a partially rated converter for fractional controllability and can integrate a small BESS. Fast grid-edge voltage fluctuations from increased solar photovoltaic (PV) and electric vehicle (EV) penetration are difficult to manage for mechanical load tap changers. Hence, along with the trend toward more BESS in the grid, the controllability and the storage-integration capability of the SST and HT are of strong interest. However, a review of literature shows existing SST and HT research is mostly at converter level, while system-level assessments are scarce. Assessing technical and economic impacts is critical to understanding the benefits and role of the SST and HT to guide future research, which is presented for the first time in this article. Experimental results from medium-voltage (MV) SST and MV HT prototypes are shown to confirm equipment-level feasibility, where the voltage controllability waveforms of an MV HT prototype are reported for the first time. Comparative simulations are performed on a modified IEEE 34-bus system. A grid-model-less decentralized grid-edge voltage control method and a day-ahead BESS dispatch method are proposed for the SST and HT. The simulations show that the SST and HT with integrated storage can host more PV, achieve peak shaving, mitigate voltage fluctuation and reverse power flow, and support energy arbitrage for operational cost reduction, compared to the LFT. Moreover, comprehensive analyses of net present value (NPV) and internal rate of return (IRR) are performed under different installed PV capacities, HT’s partial converter ratings, and BESS capacities. Sensitivities to future cost reductions of the PV and BESS are studied. Although the NPV and IRR are currently negative, 60% capital cost reduction or 150% revenue increase will make the SST and HT economically viable in the use case studied.

13 October 2020 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
LZLiran Zheng
Liran Zheng
RKRajendra Prasad Kandula
Rajendra Prasad Kandula
DDDeepak Divan
Deepak Divan
Solid-state transformers (SSTs) are a promising solution photovoltaic (PV), wind, traction, data center, battery energy storage system (BESS), and fast charging electric vehicle (EV) applications. The traditional SSTs are typically three-stage, i.e., hard-switching cascaded multilevel rectifiers and inverters with dual active bridge (DAB) converters, which leads to bulky passives, low efficiency, and high electromagnetic interference (EMI). This article proposes a new soft-switching solid-state transformer (S4T). The S4T has full-range zero-voltage switching (ZVS), electrolytic capacitor-less dc link, and controlled dv/dt, which reduces EMI. The S4T comprises two reverse-blocking current-source inverter (CSI) bridges, auxiliary branches for ZVS, and transformer magnetizing inductor as a reduced dc link with 60% ripple. Compared with the prior S4T, an effective change on the leakage inductance diode is made to reduce the number of the devices on the main power path by 20% for significant conduction loss saving and retain the same functionality of damping the resonance between the leakage and resonant capacitors and recycling trapped leakage energy. The conduction loss saving is crucial, being the dominating loss mechanism in SSTs. Importantly, the proposed single-stage SST not only holds the potential for high power density and high efficiency but also has full functionality, e.g., multiport dc loads integration, voltage regulation, and reactive power compensation, unlike the traditional single-stage matrix SST. The S4T can achieve single-stage isolated bidirectional dc-dc, ac-dc, dc-ac, or ac-ac conversion. It can also be configured input-series output-parallel (ISOP) in a modular way for medium-voltage (MV) grids. Hence, the S4T is a promising candidate for the SST. The full functionality, e.g., voltage buck-boost, multiport, etc., and the universality of the S4T for the dc-dc, dc-ac, and ac-ac conversion are verified through the simulations and experiments of two-port and three-port MV prototypes based on 3.3 kV SiC mosfets in dc-dc, dc-ac, and ac-ac modes at 2 kV.

4 August 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
LZLiran Zheng
Liran Zheng
RKRajendra Prasad Kandula
Rajendra Prasad Kandula
DDDeepak Divan
Deepak Divan
Solid-state dc transformer to integrate low-voltage dc (LVdc) microgrid, wind turbine (WT) generator, photovoltaic (PV), and energy storage (ES) into medium-voltage (MV) direct-current (MVdc) distribution grids is attractive. This article proposes current-source dc solid-state transformer (SST) for MVdc collection system in WT, PV, and ES farms or as an interface between the MVdc grid and the LVdc microgrid. Compared to conventional current-source converter (CSC) based SSTs, a switch reduction scheme on reverse-blocking device bridges is proposed to reduce device count and the number of devices on the dc-link current path. Importantly, the proposed switch reduction scheme is generic and can be applied to the dc ports of dc–ac, ac–dc, or dc–dc hard-switching or soft-switching CSC-based SSTs. Based on this scheme, the proposed current-source dc SSTs are derived, which have reduced electrolytic-capacitor-less dc-link. The proposed dc SSTs also achieve single-stage isolated dc–dc or dc–ac conversion, full-range zero-voltage switching (ZVS) for main switches, zero-current switching (ZCS) for resonant switches, and controlled $ dv/dt $ . The proposed dc SSTs, operating principles, predictive control method, the ZVS, and the controlled $ dv/dt $ under voltage buck-boost ranges are verified with MV simulations and an experimental prototype based on SiC mosfets , diodes, and a nanocrystalline transformer.

17 March 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
LZLiran Zheng
Liran Zheng
XHXiangyu Han
Xiangyu Han
ZAZheng An
Zheng An
RKRajendra Prasad Kandula
Rajendra Prasad Kandula
KKKarthik Kandasamy
Karthik Kandasamy
DDDeepak Divan
Deepak Divan
Medium-voltage dc (MVdc) grids are attractive for electric aircraft and ship power systems, battery energy storage system (BESS), fast charging electric vehicle (EV), etc. Such EV or BESS applications need isolated bidirectional MVdc to low-voltage dc (LVdc) or LVac converters. However, the existing Si-based solutions cannot fulfill the requirements of a high-efficiency and robust converter for MVdc grids. This article presents a 5-kV SiC-based universal modular solid-state transformer (SST). This universal current-source SST can interface either an LVac or LVdc grid with an MVdc grid in single-stage power conversion, while the conventional dual-active bridge (DAB) converter needs an additional inverter. The proposed SST module using 3.3-kV SiC MOSFET s and diodes is bidirectional and can serve as a building block in series or parallel for higher voltage higher power systems. The topology of each module is based on the soft-switching solid-state transformer (S4T) with reduced conduction loss, which features reduced electromagnetic interference electromagnetic interference (EMI) through controlled dv/dt, and high efficiency with full-range zero-voltage switching for main devices and zero-current switching for auxiliary devices. Operation principle of the modular S4T (M-S4T), capacitor voltage balancing control between the cascaded modules, design of components including a medium-voltage (MV) medium-frequency transformer (MFT) to realize a 50-kVA, 5-kV dc to 600 V dc or 480 V ac M-S4T are presented. Importantly, the MV MFT prototype achieves very low leakage inductance (0.13%) and 15-kV insulation with coaxial cables and nanocrystalline cores. The proposed universal modular SST is compared against the DAB solution and verified with dc–dc and dc–ac simulation and 4-kV experimental results. Significantly, the MV experimental results of a modular dc transformer with each module at MVdc are rarely covered in the literature and reported for the first time.

30 September 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
LZLiran Zheng
Liran Zheng
RKRajendra Prasad Kandula
Rajendra Prasad Kandula
DDDeepak Divan
Deepak Divan
This article proposes a multiport control method to enable partial power processing (PPP) in a medium-voltage (MV) multiport solid-state transformer (SST). MV multiport SSTs are promising in integrating low-voltage dc sources or loads such as solar photovoltaic, energy storage, and electric vehicles into smart grids without bulky line-frequency transformers. Compared with voltage-source SST, current-source (CS) SST features single-stage isolated bidirectional ac/ac, ac/dc, or dc/dc conversion using an inductive dc link. For a multiport CS SST, it is revealed in this article that the PPP capability can be enabled through the proposed control without extra hardware, different from the case of voltage-source converters where special hardware architecture is required for the PPP. With the PPP, most power exchange between LV ports is processed by only a fraction of the entire conversion stage, leading to reduced dc-link current, volume, loss, and improved efficiency. The proposed multiport PPP control scheme is analyzed to verify the advantages across a wide voltage and power range against conventional full power processing (FPP) multiport control, using the soft-switching SST (S4T) with reduced conduction loss as an example. Comparative experimental results based on a SiC three-port S4T prototype verify the effectiveness of the proposed PPP scheme against the FPP scheme under both steady state and dynamic conditions. The dc-link current reduction is measured to be more than 36%. Significantly, the proposed multiport PPP control scheme is generic and applicable to any hard-switching or soft-switching CS SSTs without extra hardware.

6 May 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Open access
LZLiran Zheng
Liran Zheng
XHXiangyu Han
Xiangyu Han
CXChunmeng Xu
Chunmeng Xu
RKRajendra Prasad Kandula
Rajendra Prasad Kandula
LGLukas Graber
Lukas Graber
DDDeepak Divan
Deepak Divan
This article proposes a multiport modular single-stage current-source solid-state transformer (SST) for applications like photovoltaic, energy storage integration, electric vehicle fast charging, data center, etc. The 7.2 kV 50 kVA current-source SST consists of five input-series output-parallel modules, each based on 3.3 kV SiC reverse-blocking mosfet -plus-diode modules. The proposed SST has some unique features. First, compared with the voltage-source or matrix converter-based SSTs, the current-source SST has a unique advantage of single-stage isolated ac/dc or ac/ac conversion with an inductive dc link, but no medium-voltage (MV) ac experiments have been reported. This article for the first time demonstrates MV ac current-source SST up to 7.5 kV peak. Second, the multiport SST has a buffer port for active power decoupling (APD) or energy storage integration. The double-line-frequency power ripple from single-phase ac grid normally results in a large capacitor size in MV SSTs. The APD scheme is proposed in MV applications for the first time to enable a reduced dc link and the electrolytic capacitor-less SST with high reliability. Third, for a direct grid-connected converter without line-frequency transformer, insulation and protection are critical. A medium-frequency transformer design passes 55 kV basic-insulation level (BIL) and 60 kV high potential dielectrics withstand test with only 0.09% leakage inductance. Importantly, a lightning protection scheme is presented to protect the SST itself from 90 kV BIL impulse. Fourth, the proposed current-source SST topology is a modular soft-switching solid-state transformer (M-S4T) with full-range zero-voltage switching and controlled dv/dt for low electromagnetic interference. These concepts are verified in a three-port M-S4T prototype with forced oil cooling under single-module, stacked-module, steady-state, and dynamic operations.