30 November 2022 in Journal of Environmental Chemical Engineering
23 February 2024 in Energy Conversion and Management
JPJuliano Souza dos Passos
+1
1 June 2023 in Resources, Conservation and Recycling
JPJuliano Souza dos Passos
15 February 2024 in Bioresource Technology
CMCarlo Alberto Marcolongo
AMAlessandro H.A. Monteverde
Alessandro H.A. Monteverde
Hydrothermal liquefaction (HTL) emerges as an efficient technology for converting food waste into biocrude. Among HTL parameters, the impact of heating rate is understudied. This study systematically explores its variation (5-115 K/min) on HTL performance using actual food waste and model compounds representing its constituents. Results revealed that an increase in heating rates significantly impacts HTL performances (+63 % biocrude and -34 % solid with food waste) with short residence times, as slower heating rates imply a longer overall time and a higher kinetic advancement of the reaction. Conversely, with longer residence times, the influence of heating rates becomes negligible, as kinetics during heating times are overshadowed by those at operating temperatures. A subtle effect of heating variation at extended residence time was observed only with carbohydrates. This research emphasizes the utility of a kinetic severity factor (KSF) as a valuable tool for simultaneously considering heating rates, operating times, and temperatures.
17 January 2025 in Composites Part B: Engineering
9 February 2026 in Energy & Fuels
Hydrothermal liquefaction (HTL) is gaining interest for the energy valorization of wet waste. While HTL performance is known to depend on biochemical composition, the role of inorganics remains poorly understood. This study evaluates the effects of the four most common metals (Na, K, Mg, and Ca) present as oxides, carbonates, phosphates, sulfates, and chlorides. Experimental results, supported by principal component analysis (PCA), revealed that inorganics significantly influence HTL performance, depending on both cation and anion type. More basic anions generally decreased solid production while favoring both biocrude and aqueous-phase yields, with carbonates performing better than oxides despite their lower basicity. Na and K enhanced these effects compared to Ca and Mg, while K and Ca led to higher HHVs and lower oxygen content in the biocrude than Na and Mg, respectively, indicating a specific role of the cations. Sodium and potassium carbonates performed best, increasing biocrude yield by 48% relative to the corresponding inorganic-free feedstock, while reducing solid production by 90%. CaCl2 was the only compound reducing biocrude yield, while increasing solid residue by 90%. This study highlights the critical influence of inorganics on HTL performance and provides a foundation for deeper insights into the underlying mechanisms.