Conventional fixation plates permanently attached to the body can lead to complications, such as stress shielding and aseptic loosening, due to their contact with the bone, resulting in bone loss. The contact between these solid fixation plates and the bone surface inhibits blood flow, potentially leading to necrosis at the interface. To overcome this challenge, a porous implant featuring a gyroid lattice structure for humerus bone fixation is proposed. However, designing such an implant typically involves deterministic approaches, which do not account for uncertainties in design parameters, loadings on the plate, and additive manufacturing process parameters. Consequently, the actual conditions experienced by the plate may not be accurately modeled. Herein, both deterministic and probabilistic analyses of a porous implant with a gyroid lattice structure positioned on the humeral bone is conducted. The findings are compared to the failure probabilities of both the conventional fixation plate and the optimal plate derived from a previous study. The study reveals that uncertainties in design parameters significantly influence the plate's failure probability compared to deterministic analysis, emphasizing the importance of probability‐based analyses for a reliable plate design.
20 June 2024 in International Journal of Pioneering Technology and Engineering
In this study, the mechanical and physical properties of polyetheretherketone (PEEK) material produced through three-dimensional (3D) printing under different production parameters were investigated. For this purpose, the results obtained by applying heat treatment to the produced samples were examined. Comparisons based on mechanical properties were supported by 3D surface profiles and XRD analyses. According to the obtained results, low nozzle diameter and high printing temperature led to an increase of up to 8% in the elastic modulus and up to 33% in tensile strength of the samples. The heat treatment applied in the study increased tensile strength by up to 8% and elastic modulus by up to 9% in samples produced with a low-diameter nozzle. In conclusion, this study aims to provide a dataset for 3D PEEK designs, intending to enhance the performance of PEEK materials that can be used in medical and industrial applications.