Currently, the processing of beige and black phosphates only concerns the main sub-layers, while the other sub-layers (lower and upper for beige phosphate and the upper for black phosphate) are considered waste rock and stored near the complex. Therefore, the object of this research is the use of mixtures of three beige phosphate sub-layers and two black phosphate sub-layers as a feed fraction for the calcination and reverses flotation processes. This research work aims to characterise and treat two types of phosphate: one beige with the sub-layers (main, lower and upper) and the other black with the sub-layers (main and upper) in order to have better recovery of P2O5. The working methodology consists of a series of sample preparation operations and characterization of the two types of beige and black phosphate. This characterization includes a petrographic study, a granulochemical analysis, an X-ray diffraction (XRD), a scanning electron microscopy/energy dispersive spectroscopy (SEM/EDS), and an atomic adsorption spectrophotometry (SAA), an auto analyzer (AA), a Bernard calcimeter. These analyzes allow on the one hand to identify the mineral phases in quantitative and qualitative manner, and on the other hand to choose the process for treating phosphates from the Kef Essenoun–Tebessa deposit. The combined method of treatment by calcination followed by reverse flotation gave satisfactory results. The P2O5 content reaches 33.88 % for beige phosphate and 33.13 % for black phosphate. The stored waste rock represents a problem for the company; this waste rock contains fairly high levels of phosphate. The treatment of the mixture of the main sub-layers with these waste rocks makes it possible to obtain a better recovery of P2O5, a better economic profitability of the Djebel Onk mining complex and an environmental impact in the region.
27 October 2026 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
Purpose. The aim of this study is to evaluate the effect of microwave pre-treatment on the mineralogical and microstructural changes in oolitic iron ore from Gara Djebilet, as well as its influence on the performance of low-intensity dry magnetic separation, with a view to improving iron enrichment and reducing phosphorus content. Methodology. Representative samples of oolitic iron ore from Gara Djebilet were subjected to mineralogical and physico-chemical characterisation. The ore was then pre-treated using microwaves, varying the power (400, 700 and 1,000) W, the exposure time (60 and 90 s) and the particle size distribution (-3 + 2, -2 + 1 and -1 + 0.5 mm). After crushing and sieving to determine particle size, the fraction between 0.075 and 0.5 mm was processed by low-intensity dry magnetic separation. Findings. Microwave pre-treatment significantly improved the recovery of iron ore from the oolitic deposit at Gara Djebilet. Under optimal conditions (1,000 W, 90 s, particle size −1 + 0.5 mm), a concentrate containing 64.14 % Fe and 0.27 % P2O5 was obtained, representing a reduction of approximately 86 % in phosphorus content compared with the raw ore. Originality. The originality of this work lies in establishing a correlation between the mineralogical and microstructural transformations induced by microwave pre-treatment and the improved metallurgical performance achieved through low-intensity dry magnetic separation, thereby opening up a new avenue for the sustainable processing of oolitic iron ores. Practical value. This study represents a sustainable alternative to conventional processes, particularly in arid regions where water use is limited. It thus offers concrete prospects for the industrial processing of oolitic ores and their integration into the steel production chain, whilst reducing operating costs and environmental impact.
30 September 2026 in Visnyk of Taras Shevchenko National University of Kyiv. Geology
Background. Sedimentary phosphate ores from Algeria often suffer significant P₂O₅ losses during conventional beneficiation. Integrating calcination as a pre-treatment step may enhance reverse flotation selectivity and reduce valuable material loss in tailings. Methods. Proportional blends (0–100 % calcined) of beige phosphate from the Kef Essennoun deposit were characterized using atomic absorption spectrometry (AAS), automated P₂O₅ analysis, X-ray diffraction (XRD), and SEM/EDS. Reverse flotation tests were conducted to evaluate P₂O₅ recovery and impurity rejection in froth products (tailings). Results. Increasing the calcined fraction significantly improved flotation selectivity: P₂O₅ recovery in tailings decreased from 3.92 % (100 % uncalcined) to 2.07 % (100 % calcined), while MgO and CO₂ contents increased in the froth, confirming effective gangue removal. Mineralogical analyses revealed that calcination decomposes carbonates, removes organic coatings, and liberates apatite grains, enhancing hydrophilicity and sink recovery. The 100 % calcined feed yielded the lowest P₂O₅ loss with a concentrate grade of ~33.8 % P₂O₅. Conclusion. Combining calcination with reverse flotation optimizes phosphate beneficiation by minimizing useful material loss, reducing reagent consumption, and generating tailings suitable for cement industry valorization. This integrated approach supports sustainable resource management within a circular economy framework.