In this work, a two component microgel assembly using soft anisometric microgels that interlink to create a 3D macroporous construct for cell growth is reported. Reactive microgel rods with variable aspect ratio are produced via microfluidics in a continuous plug‐flow on‐chip gelation method by photoinitiated free‐radical polymerization of star‐polyethylene glycol‐acrylate with glycidyl methacrylate or 2‐aminoethyl methacrylate comonomers. The resulting complementary epoxy‐ and amine‐functionalized microgels assemble and interlink with each other via a ring opening reaction, resulting in macroporous constructs with pores up to several hundreds of micrometers. The level of crosslinking depends on the functionalization degree of the microgels, which also affects the stiffness and cell adhesiveness of the microgels when modified with the cell‐adhesive GRGDS‐PC peptide. Therefore, 3D spreading and growth of cells inside the macroporous structure is influenced not only by the presence of macropores but also by the mechanical and biochemical properties of the individual microgels.
25 September 2023 in Angewandte Chemie International Edition
Microgels are water‐swollen, crosslinked polymers that are widely used as colloidal building blocks in scaffold materials for tissue engineering and regenerative medicine. Microgels can be controlled in their stiffness, degree of swelling, and mesh size depending on their polymer architecture, crosslink density, and fabrication method—all of which influence their function and interaction with the environment. Currently, there is a lack of understanding of how the polymer composition influences the internal structure of soft microgels and how this morphology affects specific biomedical applications. In this report, we systematically vary the architecture and molar mass of polyethylene glycol‐acrylate (PEG‐Ac) precursors, as well as their concentration and combination, to gain insight in the different parameters that affect the internal structure of rod‐shaped microgels. We characterize the mechanical properties and diffusivity, as well as the conversion of acrylate groups during photopolymerization, in both bulk hydrogels and microgels produced from the PEG‐Ac precursors. Furthermore, we investigate cell‐microgel interaction, and we observe improved cell spreading on microgels with more accessible RGD peptide and with a stiffness in a range of 20 kPa to 50 kPa lead to better cell growth.
The intracellular environment is crowded with macromolecules that influence biochemical equilibria and biomacromolecule diffusion. The incorporation of such crowding in synthetic cells would be needed to mimic the biochemistry of living cells. However, only a few methods provide crowded artificial cells, moreover providing cells with either heterogeneous size and composition or containing a significant oil fraction. Therefore, a method that generates monodisperse liposomes with minimal oil content and tunable macromolecular crowding using polydimethylsiloxane (PDMS)‐based microfluidics is presented. Lipid stabilized water‐in‐oil‐in‐water emulsions that are stable for at least several months and with a high macromolecular crowder concentration that can be controlled with the external osmolality are formed. A crucial feature is that the oil phase can be removed using high flow conditions at any point after production, providing the highly crowded liposomes. Genetically encoded macromolecular crowding sensors show that the high level of macromolecular crowding in the emulsions is fully retained throughout the generation of minimal‐oil lipid bilayers. This modular and robust platform will serve the study of biochemistry under physiologically relevant crowding conditions.
Anisometric rod-shaped microgels are promising building blocks for tissue engineering, offering injectability, porosity, macroscopic anisotropy, and biochemical functionality-key features for directing cell adhesion, growth, alignment, and interaction. The continuous production of thin or highly porous elongated microgels is therefore desirable, preferably offering control over their stiffness, size, and aspect ratio. We present advancements in compartmentalized jet polymerization, a microfluidic technique that generates microgels that are ten times narrower than the channel width by forming a polymer jet and crosslinking alternating segments with a pulsed laser. Originally limited to diameters of ∼8 μm, we have now refined the method to produce microgels as small as ∼3 μm. Additionally, we developed ultra-soft and ultra-porous microgels that swell to diameters of 50-120 μm with pore sizes in the range 2-5 μm. While the thin soft microgels can be employed in our Anisogel technology to combine injectability with magnetic alignment, the ultra-porous microgels would increase diffusion in our microporous annealed particle (MAP) scaffolds made from rod-shaped microgels. This paper focuses on the continuous production and characterization of rod microgels with properties that cannot be achieve with other methods. Furthermore, we report initial results of the microgels' potential and challenges to be used inside an Anisogel, which was so far only possible with stiffer magneto-responsive microgels produced by an in-mold polymerization batch process, and to form MAPs by cell-induced assembly of the ultra-porous rods. Further studies will be required to fully exploit the potential of these unique microgels for tissue engineering applications.
Organoid research holds tremendous potential for personalized medicine and drug development. However, current limitations include reproducibility issues largely due to the use of biologically derived materials, which are prone to batch-to-batch variations. Here, we report a new technology for human induced pluripotent stem cell (iPSC)-based organoid production with iPSC expansion and differentiation in the same construct in a reproducible and scalable manner, compatible with high-throughput automation. Chemically defined poly(ethylene glycol) (PEG)-based microgels are produced via parallelized step-emulsification microfluidics, enabling scalable production. This approach leverages the self-organization of iPSCs with microgels to build three-dimensional constructs, driven by robust cell-material interactions achieved through vitronectin-coated PEG microgels. This technology allows the iPSCs to expand and retain their pluripotency, after which they can be differentiated into the three germ layers, providing a suitable platform for organoid differentiation. This was further extended by differentiation into cardiac organoids and retinal photoreceptors to demonstrate two exemplary tissues.
Organoid research holds tremendous potential for personalized medicine and drug development. However, current limitations include reproducibility issues largely due to the use of biologically derived materials, which are prone to batch‐to‐batch variations. Here, we report a chemically defined microgel‐based method for human induced pluripotent stem cell (iPSC)‐based organoid generation, enabling expansion of iPSCs and their subsequent differentiation within one construct across different scales, including compatibility with automated 384‐well plate workflows. Chemically defined poly(ethylene glycol) (PEG)‐based microgels are produced via parallelized step‐emulsification microfluidics, enabling scalable production. This approach leverages the self‐organization of iPSCs with microgels to build three‐dimensional constructs, driven by robust cell‐material interactions achieved through vitronectin‐coated PEG microgels. This technology allows the iPSCs to expand and retain their pluripotency, after which they can be differentiated into the three germ layers, providing a suitable platform for organoid differentiation. This was further extended by differentiation into cardiac organoids and retinal photoreceptors to demonstrate two exemplary tissues.