1 July 2023 in Geoscientific Model Development
EMElena C. McDonald-Buller
+5
We present the Fire Inventory from National Center for Atmospheric Research (NCAR) version 2.5 (FINNv2.5), a fire emissions inventory that provides publicly available emissions of trace gases and aerosols for various applications, including use in global and regional atmospheric chemistry modeling. FINNv2.5 includes numerous updates to the FINN version 1 framework to better represent burned area, vegetation burned, and chemicals emitted. Major changes include the use of active fire detections from the Visible Infrared Imaging Radiometer Suite (VIIRS) at 375 m spatial resolution, which allows smaller fires to be included in the emissions processing. The calculation of burned area has been updated such that a more rigorous approach is used to aggregate fire detections, which better accounts for larger fires and enables using multiple satellite products simultaneously for emissions estimates. Fuel characterization and emissions factors have also been updated in FINNv2.5. Daily fire emissions for many trace gases and aerosols are determined for 2002–2019 (Moderate Resolution Imaging Spectroradiometer (MODIS)-only fire detections) and 2012–2019 (MODIS + VIIRS fire detections). The non-methane organic gas emissions are allocated to the species of several commonly used chemical mechanisms. We compare FINNv2.5 emissions against other widely used fire emissions inventories. The performance of FINNv2.5 emissions as inputs to a chemical transport model is assessed with satellite observations. Uncertainties in the emissions estimates remain, particularly in Africa and South America during August–October and in southeast and equatorial Asia in March and April. Recommendations for future evaluation and use are given.
1 December 2020 in Atmospheric Chemistry and Physics
Global coupled chemistry–climate models underestimate carbon monoxide (CO) in the Northern Hemisphere, exhibiting a pervasive negative bias against measurements peaking in late winter and early spring. While this bias has been commonly attributed to underestimation of direct anthropogenic and biomass burning emissions, chemical production and loss via OH reaction from emissions of anthropogenic and biogenic volatile organic compounds (VOCs) play an important role. Here we investigate the reasons for this underestimation using aircraft measurements taken in May and June 2016 from the Korea–United States Air Quality (KORUS-AQ) experiment in South Korea and the Air Chemistry Research in Asia (ARIAs) in the North China Plain (NCP). For reference, multispectral CO retrievals (V8J) from the Measurements of Pollution in the Troposphere (MOPITT) are jointly assimilated with meteorological observations using an ensemble adjustment Kalman filter (EAKF) within the global Community Atmosphere Model with Chemistry (CAM-Chem) and the Data Assimilation Research Testbed (DART). With regard to KORUS-AQ data, CO is underestimated by 42 % in the control run and by 12 % with the MOPITT assimilation run. The inversion suggests an underestimation of anthropogenic CO sources in many regions, by up to 80 % for northern China, with large increments over the Liaoning Province and the North China Plain (NCP). Yet, an often-overlooked aspect of these inversions is that correcting the underestimation in anthropogenic CO emissions also improves the comparison with observational O3 datasets and observationally constrained box model simulations of OH and HO2. Running a CAM-Chem simulation with the updated emissions of anthropogenic CO reduces the bias by 29 % for CO, 18 % for ozone, 11 % for HO2, and 27 % for OH. Longer-lived anthropogenic VOCs whose model errors are correlated with CO are also improved, while short-lived VOCs, including formaldehyde, are difficult to constrain solely by assimilating satellite retrievals of CO. During an anticyclonic episode, better simulation of O3, with an average underestimation of 5.5 ppbv, and a reduction in the bias of surface formaldehyde and oxygenated VOCs can be achieved by separately increasing by a factor of 2 the modeled biogenic emissions for the plant functional types found in Korea. Results also suggest that controlling VOC and CO emissions, in addition to widespread NOx controls, can improve ozone pollution over East Asia.
20 August 2022 in Journal of Geophysical Research: Atmospheres
We analyze the effects of the diurnal cycle of fire emissions (DCFE) and plume rise on U.S. air quality using the MUSICAv0 (Multi‐Scale Infrastructure for Chemistry and Aerosols Version 0) model during the FIREX‐AQ (Fire Influence on Regional to Global Environments and Air Quality) and WE‐CAN (Western wildfire Experiment for Cloud chemistry, Aerosol absorption and Nitrogen) field campaigns. To include DCFE in the model, we employ two approaches: a DCFE climatology and DCFE derived from a satellite fire radiative power product. We also implemented two sets of plume‐rise climatologies, and two plume‐rise parameterizations. We evaluate the model performance with airborne measurements, U.S. EPA Air Quality System surface measurements, and satellite products. Overall, including plume rise improves model agreement with observations such as aircraft observations of CO and NOx for FIREX‐AQ and WE‐CAN. Applying DCFE also improves model performance, such as for surface PM2.5 in fire‐impacted regions. The impact of plume rise is larger than the impact of DCFE. Plume rise can greatly enhance modeled long‐range transport of fire‐emitted pollutants. The simulations with plume‐rise parameterizations generally perform better than the simulations with plume‐rise climatologies during FIREX‐AQ, but not for WE‐CAN. The 2019 Williams Flats Fire case study demonstrates that DCFE and plume rise change fire impacts because fire emissions are subject to different meteorology and chemistry when emitted at different times of a day and altitudes. Moreover, DCFE and plume rise also impact local‐to‐regional meteorology and chemical reaction rates. DCFE and plume rise will be included in future MUSICA versions.
5 December 2019 in Journal of Geophysical Research: Atmospheres
Accurate precipitation estimates are critical to simulating seasonal snowpack evolution. We conduct and evaluate high‐resolution (4‐km) snowpack simulations over the western United States (WUS) mountains in Water Year 2013 using the Noah with multi‐parameterization (Noah‐MP) land surface model driven by precipitation forcing from convection‐permitting (4‐km) Weather Research and Forecasting (WRF) modeling and four widely used high‐resolution datasets that are derived from statistical interpolation based on in situ measurements. Substantial differences in the precipitation amount among these five datasets, particularly over the western and northern portions of WUS mountains, significantly affect simulated snow water equivalent (SWE) and snow depth (SD) but have relatively limited effects on snow cover fraction (SCF) and surface albedo. WRF generally captures observed precipitation patterns and results in an overall best‐performed SWE and SD in the western and northern portions of WUS mountains, where the statistically interpolated datasets lead to underpredicted precipitation, SWE, and SD. Over the interior WUS mountains, all the datasets consistently underestimate precipitation, causing significant negative biases in SWE and SD, among which the results driven by the WRF precipitation show an average performance. Further analysis reveals systematic positive biases in SCF and surface albedo across the WUS mountains, with similar bias patterns and magnitudes for simulations driven by different precipitation datasets, suggesting an urgent need to improve the Noah‐MP snowpack physics. This study highlights that convection‐permitting modeling with proper configurations can have added values in providing decent precipitation for high‐resolution snowpack simulations over the WUS mountains in a typical ENSO‐neutral year, particularly over observation‐scarce regions.
19 March 2024 in Environmental Research Letters
Fires in the wildland-urban interface (WUI) are an important issue globally. To understand the change of WUI, we develop a 9 km worldwide unified wildland-urban interface database for 2001–2020 with Random Forest models and satellite data. We find that WUI has been increasing in all populated continents from 2001 to 2020 and the global relative increase is 24%, with the largest relative increase (∼59%) over Africa. Global total fire counts decrease by 10% from 2005 to 2020, whereas the WUI fraction of fire counts increases by 23%. The global total burned area decreases by 22% from 2005 to 2020, whereas the WUI fraction of burned area increases by 35%. These are mainly due to the expansion of WUI area. On all the populated continents, the WUI fractions of fire counts are higher than the WUI fractions of burned area, implying that WUI fires tend to have smaller sizes than wildland fires. We also project future WUI changes for the years 2030 and 2040, together with the projection of future fire burned area under different shared socioeconomic pathways (SSP) scenarios in the Community Earth System Model version 2 (CESM2). The projected global WUI fraction (excluding Antarctica and the oceans) is 5.9% in 2040 compared to 4.8% in 2020. The global WUI fraction of burned area is projected to increase from now to 2040 under most scenarios analyzed in this study, unless the WUI area stays at the 2020 level together with the projected burned area under SSP4-4.5. This study is a first step to understanding the changes of WUI fires at the global scale and demonstrates a growing importance of WUI fires. The global multi-year WUI and WUI fire datasets developed in this study can facilitate future work quantifying the impacts of WUI fires on air quality and climate.
14 March 2025 in Science Advances
Fires in the wildland-urban interface (WUI) are a global issue with growing importance. However, the impact of WUI fires on air quality and health is less understood compared to that of fires in wildland. We analyze WUI fire impacts on air quality and health at the global scale using a multi-scale atmospheric chemistry model—the Multi-Scale Infrastructure for Chemistry and Aerosols model (MUSICA). WUI fires have notable impacts on key air pollutants [e.g., carbon monoxide (CO), nitrogen dioxide (NO 2 ), fine particulate matter (PM 2.5 ), and ozone (O 3 )]. The health impact of WUI fire emission is disproportionately large compared to wildland fires primarily because WUI fires are closer to human settlement. Globally, the fraction of WUI fire–caused annual premature deaths (APDs) to all fire–caused APDs is about three times of the fraction of WUI fire emissions to all fire emissions. The developed model framework can be applied to address critical needs in understanding and mitigating WUI fires and their impacts.