1 January 2012 in Journal of Nanomaterials
Zinc oxide was obtained by precipitation in an emulsion system with zinc acetate used as a precursor of ZnO and potassium hydroxide or sodium hydroxide as a precipitating agent. The cyclohexane, as an organic phase, and a nonionic surfactant mixture were also used for preparation of the emulsion. By applying modifications of the ZnO precipitation process, such as changing the precipitating agent, composition of substrates, and the rate of substrate dosing, some interesting structures of ZnO particles were obtained. The morphology of the modified samples was analysed based on SEM (scanning electron microscope) and TEM (transmission electron microscope) images. Moreover the samples were characterised by determination of their dispersive properties using the noninvasive back scattering method (NIBS), adsorption parameters (BET), and crystalline structure (XRD). Thermogravimetric analysis (TG) as well as infrared spectrophotometry (FT‐IR) was also applied. For selected samples their electrical properties (dielectric permittivity and electric conductivity) were also measured. The zinc oxide obtained consisted of particles in the shapes of solids, ellipsoids, rods, and flakes, with size ranging from 164 to 2670 nm and showed well‐developed surface area with values as high as 20 m2/g.
1 July 2002 in Journal of Non-Crystalline Solids
9 November 2011 in Journal of Electroceramics
Dielectric behaviour of BiFeO3 ceramics, obtained by hot-pressing of nanopowders produced by mechanochemical synthesis from Bi2O3 and Fe2O3 oxides (weight ratio 2:1), was studied in the temperature range 125–575 K. The ceramics was found to exhibit step-like dielectric response ε*(T) with high permittivity values, similar to the behaviour of materials with giant dielectric permittivity. Three overlapping relaxation processes contribute to the dielectric response: i) relaxation in the low-temperature range (220–420 K), characterized by activation energy of 0.4 eV, ii) relaxation in the temperature range 320–520 K with activation energy of 1.0 eV and iii) broad dielectric anomaly in the vicinity of 420 K, which disappears after 1 h annealing at 775 K. The low-temperature relaxation is ascribed to the carrier hopping process between Fe2+ and Fe3+ ions. The presence of mixed valence of the Fe ions was proved by X-ray photoelectron spectroscopy. Dielectric relaxation in the middle-temperature range is considered as a result of grain boundary effect and internal barrier layers related to Bi25FeO40 phase as verified by X-ray diffraction. The high-temperature dielectric anomaly we relate to short-range hopping of ordered oxygen vacancies.
1 February 2013 in Powder Technology
1 May 2016 in Materials Science and Engineering: B
1 April 2015 in Polymer Testing