3 June 2024 in IEEE Transactions on Power Systems
Modern bulk power systems are developing into AC-DC hybrid systems with high penetration of renewables. There has been a lack of representative benchmarks to study stability and security problems of modern power systems. This paper presents an attempt to provide a set of four test models, addressing problems of voltage stability, rotor angle stability, frequency stability, and power frequency overvoltage under large disturbance. On the four stability/security problems, the models consider both their conventional features and distinct features induced by renewables. All the data of the models are extracted from real power systems, with modifications to establish a near-future scenario with over 50% renewable penetration. The test models are proposed by China Electric Power Research Institute, and acknowledged by Chinese Society for Electrical Engineering (CSEE). They are expected to serve educators, researchers and practitioners in related areas.
16 May 2022 in IEEE Transactions on Power Systems
Line-commutated-converter HVDC (LCC-HVDC) is generally believed to impair voltage stability. While in a Chinas practical power grid, increase of HVDC power unexpectedly enhances the stability. The phenomenon reveals that existing studies overlook HVDCs systematical impact on the receiving AC system. This paper empirically elaborates how the phenomenon arises, theoretically clarifies the mechanism, and demonstrates its effect on practical system operating. In this paper, systematical features of power grid are visually depicted by two vectors, i.e., network structural vector and power-flow conditional vector. A unified burden rate is proposed to evaluate voltage stability of any AC bus. Impact of HVDC is explicitly expressed by two positive-definite terms and one negative-definite term. The latter of them is overlooked by most existing literatures, and enhances voltage stability by reducing the burden rate. The proposed methodology is validated by simulations with a practical power system in Asia with tens of HVDC infeed and tens of thousands of AC nodes.
1 March 2023 in IEEE Transactions on Power Systems
Increased penetration of renewable energy sources (RES) has brought challenges to load modelling techniques. This paper proposes a synthesis load model with RES (SLMR), and elaborates related industrial practice conducted by China Electric Power Research Institute. Several practical issues are addressed in designing and implementing SLMR, such as load survey and representation of different types of RESs. Besides, three new modelling concerns brought by RESs are novelly addressed in the paper, i.e., aggregation of various RES parameters, consideration of various RES terminal voltage, and additional line loss due to RES response. Parameterization of the SLMR calibrates widely varied node voltage in distribution grid, and aggregates them to one equivalent node. The proposed SLMR is practically applied in industrial works, which is demonstrated in the paper.
23 April 2019 in IEEE Transactions on Power Systems
Line-commutated converter based-HVDC (LCC- HVDC) is extensively used in modern power systems. Most of the LCC-HVDCs are implemented with the control strategy termed marginal current control method (MCCM), while their operation is sensitive to disturbance from the AC part of the system. This paper originally reveals the mechanism of two types of oscillations induced by the MCCM after AC disturbances, i.e. the current boundary induced oscillation and the current error induced oscillation. A coordinated marginal current control method (CMCCM) is proposed, aiming at suppressing the aforementioned oscillations and enhancing HVDC recovery performance. Compared to the MCCM that responds only to DC voltage, the CMCCM additionally considers AC voltage, AC current and power factor of the converter. AC grid's parameters are also taken into account. With a more considerate design, the empirical current boundary determined by the MCCM is replaced with an analytical one, to coordinately control DC current. Therefore, better performance of HVDC is achieved. Simulations in RTDS reveal that the proposed CMCCM can suppress the oscillations, speed up HVDC recovery process and moderate transient over voltage of HVDC.
6 March 2019 in Journal of Modern Power Systems and Clean Energy
High-voltage direct current (HVDC) transmission is playing an increasingly important role in modern power systems, and the resulted power/voltage stability issue has raised widespread concern. This paper presents an on-line power/voltage stability index (PVSI) for multi-infeed HVDC (MIDC) systems. Different from the existing indices which are developed mainly for off-line and static analysis, the proposed PVSI can be applied in real time. Effects of system changes on stability assessment such as change of system states and control strategies are considered. Thus, helpful guidance can be provided for on-line HVDC stability and controls. The PVSI is originally deduced for single-infeed HVDC systems in an “AC way” by analyzing the power and voltage stability of both pure AC systems and HVDC systems. Moreover, its on-line application in practical MIDC systems is realized by building an equivalent single-infeed model, and utilizing nowadays measurement and communication infrastructures such as wide-area measurement system (WAMS). The effectiveness of the PVSI is verified through simulations in real-time digital simulator (RTDS).
8 August 2024 in IEEE Transactions on Power Systems
The present research focuses on the transient stability of power systems embedded with a high penetration of converter-interfaced generation (CIG). It is investigated that under large disturbances, power systems with CIGs may exhibit the characteristic of multiple stable equilibrium points (SEPs). This characteristic and its associated stability potential have not been thoroughly studied in conventional power systems, primarily due to the prevalent assumption of a single SEP constrained by the physical limitations of the large-capacity synchronous generator. Since the critical clearing time (CCT) is no longer able to determine system transient stability with multiple SEPs, the absolute instability boundary (AIB) condition is proposed. It is found that if the trajectory surpasses the AIB, the power system will be unable to maintain stability after large disturbances. In what follows, an energy function is introduced to assess transient stability considering multiple SEPs. At the end of the study, the impact of CIG's frequency limiters on transient stability is studied, and a transient stability enhancement method is derived based on the AIB condition and safety constraints. This provides a basis for CIGs with millisecond-level dynamics to respond to power systems with near-second dynamics. Numerical simulations demonstrate the effectiveness of the proposed theoretical results.