6 April 2009 in IET Communications
Peak-to-average power ratio (PAPR) is a major drawback in most multi-carrier communication techniques such as orthogonal frequency division multiplex system (OFDM). OFDM consists of lots of independent modulated subcarriers, as a result the amplitude of such a signal can have very large values. These large peaks increase the amount of intermodulation distortion resulting in an increase in the error rate. The PAPR of an OFDM signal can be reduced in several ways: selective mapping, Golay sequences, cyclic coding, clipping and filtering, and multiple signal representation techniques. The authors have improved the performance of the OFDM system by using low-density parity-check (LDPC) codes as an alternative to turbo coding in mitigating the PAPR problem which has been used in the pervious works of the authors. The authors present the design for the proposed (LDPC) code technique that achieves good error correction performance and is used to lower the PAPR in a multiple-input multiple-output OFDM system. The simulation results show that 6–60% reduction in PAPR over current values in the literature can be achieved depending on the system type.
20 May 2010 in International Journal of Speech Technology
1 January 2007 in International Journal of Mobile Communications
A systematic procedure for a new approach to reducing the high Peak-to-Average Power Ratio (PAPR) of OFDM using turbo coding is described in this paper. Part of the produced symbol from the turbo coding process with low PAPR is sent instead of the original OFDM symbol, whilst the rest is sent through different antenna(s). This technique can support different types of modulation and coding techniques, and offers better results in both the CCDF and the BER than the conventional techniques currently proposed for this purpose, such as the clipping technique and the PTS technique, which presented by computer simulations.
1 May 2012 in IET Communications
This study presents a proper way to improve the multiple-input multiple-output orthogonal frequency division multiplexing (OFDM) system by proposing a new tackling method to reduce the peak-to-average power ratio (PAPR). It is attained by reconstructing the fast Fourier transform block in the OFDM based on the wavelet packet transform, called forward wavelet frequency division multiplexing. In addition, a new pre-processing technique has been introduced to increase the orthogonality among the tested data which is based on imposing the eigenvalues/eigenvector extracting features. Numerical and simulation results show that the combination between the new structure of OFDM transceivers and the pre-processing block has lower PAPR values. It is compared with the conventional OFDM structures and showed that the bit error rate performance has been improved for the same bandwidth occupancy, which is attained at the cost of introducing additional complexity to the transceiver's structure. The simulation results show that 6–60% reduction in PAPR over current values in the literature can be achieved depending on the system type.
1 November 2006 in IEEE Transactions on Consumer Electronics
Digital video broadcasting - handheld (DVB-H) is the technology driving mobile TV, which uses orthogonal frequency division multiplexing (OFDM) systems with multiple-input multiple-output technology (MIMO). These mobile communication systems have a promising future of supporting high data rate transmissions for both video and data. However, since the OFDM systems are sensitive to the peak-to-average power ratio (PAPR) problem, this work proposes a new technique (novel technique to reduce the PAPR based on turbo coding (NTRPT)), based on the turbo encoding technology, to reduce the PAPR effects for MIMO-OFDM-based DVB-H systems. This technique has been implemented and validated in hardware. It can support different types of modulation and coding techniques, and offers better results in reducing the PAPR than the conventional techniques currently proposed for this purpose, such as the clipping technique and the partial transmit sequence (PTS) technique, presented here using computer simulations