The robotics community has seen an exponential growth in the level of complexity of the theoretical tools presented for the modeling of soft robotics devices. Different solutions have been presented to overcome the difficulties related to the modeling of soft robots, often leveraging on other scientific disciplines, such as continuum mechanics, computational mechanics, and computer graphics. These theoretical and computational foundations are often taken for granted and this leads to an intricate literature that, consequently, has rarely been the subject of a complete review. For the first time, we present here a structured overview of all the approaches proposed so far to model soft robots. The chosen classification, which is based on their theoretical and numerical grounds, allows us to provide a critical analysis about their uses and applicability. This will enable robotics researchers to learn the basics of these modeling techniques and their associated numerical methods, but also to have a critical perspective on their uses.
20 September 2022 in IEEE Robotics & Automation Magazine
The inverse kinematic control of soft robots appears as an open challenge that has been the subject of a number of letters presented in the last decade. Some solutions have been provided based on specific assumptions on the robot’s shape or the actuation mechanism. Other more generic approaches are characterized by a significant computational cost or by a low level of accuracy for very high deformations. In the effort to overcome some of these limitations, here we present a Geometrically-Exact (GE) inverse kinematics controller, which can be applied to soft manipulators having general threadlike actuators’ routing. Being GE, the approach is suitable to applications involving arbitrarily large bending and twisting, and, on the other side, it relies on a reduced number of Degrees of Freedom (DOFs). We prove the feasibility of the proposed Jacobian-based inverse kinematic control in simulation for soft manipulators with complex and discontinuous actuators’ routing.
25 July 2024 in The International Journal of Robotics Research
The need for fast and accurate analysis of soft robots calls for reduced order models (ROM). Among these, the relative reduction of strain-based ROMs follows the discretization of the strain to capture the configurations of the robot. Based on the geometrically exact variable strain parametrization of the Cosserat rod, we developed a ROM that necessitates a minimal number of degrees of freedom to represent the state of the robot: the Geometric Variable Strain (GVS) model. This model allows the static and dynamic analysis of open-, branched-, or closed-chain soft-rigid hybrid robots, all under the same mathematical framework. This paper presents for the first time the complete GVS modeling framework for a generic hybrid soft-rigid robot. Based on the Magnus expansion of the variable strain field, we developed an efficient recursive algorithm for computing the Lagrangian dynamics of the system. To discretize the soft link, we introduce state- and time-dependent basis, which is the most general form of strain basis. We classify the independent bases into global and local bases. We propose “FEM-like” local strain bases with nodal values as their generalized coordinates. Finally, using four real-world applications, we illustrate the potential of the model developed. We think that the soft robotics community will use the comprehensive framework presented in this work to analyze a wide range of specific robotic systems.
31 January 2024 in IEEE Robotics and Automation Letters
Efficient modeling of soft robots for design optimization and control is an active area of research. When representing soft robots as an assembly of rods and rigid bodies, strain-based parametrization has proved to be able to reduce the required number of degrees of freedom drastically. However, this reduction ability strongly depends on the choice of strain basis employed to describe the system. In this letter, we proposed a new implicit strain parametrization, and we showed its use to represent the system's configuration manifold with no more degrees of freedom than the number of actuators. Coupled with standard strain bases, this parametrization is applied to the dynamic simulation and control of soft robots employing a handful of generalized coordinates, drastically simplifying the control design problem. The approach is validated against a high-order model and exploited for shape (configuration space) and tip-pose (task-space) control of a complex tendon-driven soft robot.
4 December 2024 in IEEE Robotics and Automation Letters
Soft robotic systems pose a significant challenge for traditional modeling, estimation, and control approaches, primarily owing to their inherent complexity and virtually infinite degrees of freedom (DoFs). This work introduces an innovative method for dynamically estimating the states of tendon-actuated soft manipulators. Our technique merges the Geometric Variable-Strain (GVS) approach with a kinematic formula that links the length variation of tendons to the deformations of the manipulator and a nonlinear observer design based on state-dependent Riccati equation (SDRE). In our methodology, the soft links are represented by Cosserat rods, and the robot's geometry is parameterized by the strain field along its length. Consequently, its infinite dimensions can be described by utilizing multiple degrees of freedom, depending on the required precision. This enables us to estimate the states (pose and velocity) of tendon-actuated soft manipulators solely based on tendon displacements and actuator forces. Through simulation, we demonstrate the convergence of our estimation method across various DoFs and actuator numbers, revealing a trade-off between the number of DoFs and required actuators for observing system states. Furthermore, we validate our approach with an experimental prototype of 25 cm in length, achieving an average tip position error during dynamic motion of 1.79 cm-less than 7 $\%$ of the overall body length.