1 January 2020 in Procedia Manufacturing
16 March 2024 in Mechanics of Materials
1 January 2020 in Procedia Manufacturing
28 February 2024 in Journal of Manufacturing Science and Engineering
Springback is one of the factors that causes decreased product quality in tube bending; 2D and 3D stretch bending can be used to manufacture a complex geometry of a tube with springback reduction. For a nonlinear springback problem in tube bending, an artificial neural network (ANN) is an attractive data-driven approach to achieving springback prediction and control. The main objective of this paper is to control springback and improve geometrical quality with an ANN in 2D and 3D stretch bending of a rectangular tube. In general, an ANN is trained with collected data sets from a large number of experiments, causing expensive costs and time-consuming work. In the present work, the training data sets for the proposed ANN are obtained from both experiments and an analytical springback model. As the analytical model can adopt different bending angles, material properties, and geometries, supplementary data by the analytical model significantly reduced the number of experiments needed for ANN training. Contrary to the typical springback predictions, the proposed ANN synthesizes the machine settings based on the desired dimensions as the inputs. It is shown that springback can be controlled by specifying the bend angles provided by the ANN prediction. The proposed ANN method was validated in 2D and 3D stretch bending of a rectangular tube, and its prediction and control performance are favorably compared to an ANN trained with only experimental data sets.
28 March 2023 in Journal of Manufacturing Science and Engineering
In profile bending, the geometrical defect that reduces dimensional quality is mainly due to springback. While predicting dimensions after bending is important for quality control, many factors during bending cause difficulty in springback prediction. Furthermore, complex three-dimensional (3D) shapes in bending can make springback prediction significantly more difficult. This work presents a springback prediction method for varying curvature 3D profile/tube bending. An advanced five-axis bending machine, with rotary semi-dies opposing each other, has been developed. As the geometry of the bend die constrains the workpiece in the bending region, a model for 3D stretch bending is established from the rotational motion of the bend die. The discretized curvature of a bent profile geometry is described by using the Frenet–Serret frames, and a model for springback prediction is further developed based on the kinematics analysis of the bending process. This generalized analytic approach and numerical simulation are applied to evaluate springback in both 2D and 3D stretch bending of a thin-walled aluminum profile with a rectangular cross section. The analytical and numerical results for springback prediction are validated with experiments, showing good agreement. The developed model is able to evaluate 3D springback of a profile with arbitrary cross section efficiently for product design and development.