Interfacial hidden defects in reactive adhesives (specifically polymeric methylene diphenyl diisocyanate, pMDI) are often governed by a reaction–transport competition: low-viscosity monomers penetrate porous substrates faster than curing, producing starved bondlines. Herein, we introduced moisture-activated co-networking as a general design principle for isocyanate curing, enabled by compositionally matched natural straw microparticles that act as full lignocellulosic, in-situ moisture-bearing, gap-bridging microunits. Further investigation revealed that this strategy mechanistically enabled a dual-function enhancement. Firstly, lignocellulosic microparticles physically filled voids to create a continuous bondline. Secondly and more crucially, pMDI interacted indiscriminately with both microparticles and wood substrate through inherent moisture due to their shared lignocellulosic nature and matched composition. These effects collectively extended the adhesive interface and chemically promoted a comprehensive formation of interpenetrating polymer network (IPN) throughout the bonding region. As the result, lap-shear tests achieved over 300% increase in boiling-water wet strength (from 0.86 MPa to 3.75 MPa) upon the incorporation of only 10 wt.% microparticles. Molecular-level investigations indicated that the in-situ moisture from lignocellulosic microparticles facilitated forming a more stable six-membered ring transition state in curing, which also reduced the activation energy by 35−84% and promoted an IPN-like interphase with a 14−17 Å thickness of penetration in the model.