Viktor Mikhaylovich Shevko

Viktor Mikhaylovich Shevko

Auto-generated profile, based on publicly available information

Viktor Mikhaylovich Shevko

Department of Silicate Technology and Metallurgy, Higher School of Chemical Engineering and Biotechnology, Mukhtar Auezov South Kazakhstan University, Tauke Khan avenue 5, 160012 Shymkent, Kazakhstan

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 February 2021 in Acta Metallurgica Slovaca
Verified
Journal Article
Closed access
PDF file
VSViktor Shevko
Viktor Shevko
YAYevgeniy Afimin
Yevgeniy Afimin
GKGulnara Karatayeva
Gulnara Karatayeva
ABAlexandra Badikova
Alexandra Badikova
TITimur Ibrayev
Timur Ibrayev
The article contains the research results of obtaining a ferroalloy from a carbon ferrochrome dust containing 30,2% of Сr2O3, 23.4% of SiO2, 32.7% of MgO, 5.0% of FeO, 1.6% of CaO, 4.5%of Al2O3, 2.3%of C, and 0.3 %-others. The studies were carried out by a thermodynamic modeling method using the HSC-5.1 software package (Outokumpy) based on the principle of the Gibbs energy minimum, the Box-Hunter rototable planning technique and electric melting of the dust in an arc furnace. It was found that the interaction of the dust with carbon under equilibrium conditions and in the presence of iron leads to formation of Cr4C(T>10000C),Cr3C2, Cr7C3,Cr (T>11000C), FeSi (T>13000C), SiC (T>14000C), SiOg and Si(T>15000C). In the temperature range of 1745-19000C and in the presence of 18-34% of carbon and 8% of iron of the dust mass, the resulting ferroalloy contained 18.5-25.2% of Si and 46.8-49.4% of Cr (in this case the silicon extraction degree into the alloy was 60.0-64.4%, the chromium one–99.8%). When the electrosmelting the granulated dust together with coke and steel shavings, the chromium extraction degree into the alloy was 98-99%, the silicon one–53-57%; the obtained ferroalloys containing 18.3-21.9% of silicon and 45.6-53.6%of chromium meet the requirements to FeCrSi23-grade ferrosilicochromium.

6 July 2022 in Metallurgical Research & Technology
Verified
Journal Article
Closed access
PDF file
VSViktor М. Shevko
Viktor М. Shevko
YAYerbol Ye. Akylbekov
Yerbol Ye. Akylbekov
GKGulnara Ye. Karataeva
Gulnara Ye. Karataeva
ABAlexandra Badikova
Alexandra Badikova
The article examines results of studies on the effect of temperature, amount of carbon and pressure on the possibility of obtaining iron silicides and gaseous magnesium by carbon-thermal reduction of silicon and magnesium oxides containing in chrysotile-asbestos waste products. The studies were carried out using the HSC-6.0 software package (Outokumpy) and the second-order rotatable designs (Box-Hunter plans). It has been established that technology allows us to increase αSi(al), for example, at 1400 °C from 89.6 to 96.75%, reduce undesirable losses of silicon with gaseous SiO from 8.97 to 2.08% and slightly increase αMg(gas) from 97.41 to 97.54%. The alloy formed at 1300 °C contains 28.7% of silicon and corresponds to FS25 grade ferrosilicon.

3 October 2022 in Periodica Polytechnica Chemical Engineering
Verified
Journal Article
Closed access
PDF file
VSViktor Shevko
Viktor Shevko
DADosmurut Kazylbievich Aitkulov
Dosmurut Kazylbievich Aitkulov
ABAlexandra Badikova
Alexandra Badikova
This article examines results of the thermodynamic modeling of interaction of the briquetted tailings obtained at hydrometallurgical leaching of the vanadium-containing quartzites (black shales) with carbon and iron, determination of Si, V, Fe, C equilibrium distribution and optimal conditions for the formation of various grades of ferrosilicon, as well as the electric melting to produce silicon alloys. The research techniques were the method of thermodynamic modeling using the HSC-6.0 software package (Outokumpu), the second-order rotatable designs (Box-Hunter plans) and electrofusion in an arc furnace. It was established that an increase in the amount of iron from 11 to 39% makes it possible to increase the extraction degree of silicon into an alloy up to 72–73% in the temperature of 1800–2000 °C, in the process the silicon concentration in the alloy decreases from 57–65.7 to 40.5–40.9%; FS45-grade ferrosilicon at the extraction degree of silicon in the alloy of 70–72.6% can be formed in the temperature of 1750–2000 °C in the presence of 29–39% Fe, FS50 ferrosilicon is formed at 25.5–35.0% Fe and 1870–2000 °C, and FS65 ferrosilicon – in the temperature of 1895–2000 °C in the presence of 11–12.7% Fe. The FS45-grade ferrosilicon was formed during electric smelting of a charge containing 57% of the briquettes, 21% of coke, 22% of steel chips, and the FS50-grade ferrosilicon – using a charge consisting of 61% of the briquettes, 22% of coke and 17% of steel chips; the silicon extraction degree into the alloys is 73–79%.

9 September 2023 in Case Studies in Chemical and Environmental Engineering
Verified
Journal Article
Open access
YAYerbol Akylbekov
Yerbol Akylbekov
VSViktor Shevko
Viktor Shevko
GKGulnara Karatayeva
Gulnara Karatayeva

15 February 2023 in Metallurgical Research & Technology
Verified
Journal Article
Closed access
PDF file
NMNurseiit M. Mirkayev
Nurseiit M. Mirkayev
VSViktor M. Shevko
Viktor M. Shevko
DADosmurat K. Aitkulov
Dosmurat K. Aitkulov
ABAlexandra D. Badikova
Alexandra D. Badikova
The article examines the results of studying the possibility of obtaining ferrosilicon from tripoli. The studies included the thermodynamic modeling using the HSC-6.0 software package, based on the minimum Gibbs energy principle, and electric melting of tripoli in an arc single-phase electric furnace. The effect of temperature and the amount of carbon on the extraction degree of silicon into alloys and the silicon concentration in these alloys were determined. It was found that the interaction products of tripoli with carbon and iron under equilibrium conditions are mainly FeSi2, Fe3Si, FeSi, Fe5Si3, SiC, SiO(g), CaSiO2, MgSiO3, Al, Si, CO; the silicon extraction degree of 70–77% and its concentration in the alloy of 44.9–47.7% were achieved in the temperature range of 1830–2000 °C in the presence of 34–38% of carbon and 29% of iron; in the temperature range of 1700–1900 °C, the extraction degree of silicon into the alloy was 50–77.1%, and the concentration of silicon in the alloy at 1900 °C was 45–45.85%. During the electric melting of tripoli together with coke and steel shavings, depending on the composition of the charge, FS25 and FS65 ferrosilicon was formed.

25 June 2020 in Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources
Verified
Journal Article
Open access
VSViktor Shevko
Viktor Shevko
PKP.V. Kaskin
P.V. Kaskin
ABAlexandra Badikova
Alexandra Badikova
DAD.D. Amanov
D.D. Amanov
The article presents the results of studies on the production of ferrosilicon from iron ore (magnetite) concentrate and quartzite. The studies were carried out by thermodynamic simulation using the HSC-5.1 software package, based on the principle of Gibbs minimum energy and electric smelting of the concentrate together with coke and quartzite in a single-electrode arc furnace. Based on the studies, it was found that, under equilibrium conditions, the interaction of magnetite concentrate with silicon oxide (IV) and carbon is accompanied by the formation of FeSi (> 1200 0C), Fe3Si (> 1100 0C), FeSi2 (> 500 0C), Zng (> 800 0C) Pbg (> 1200 0C); the degree of silicon extraction into the ferroalloy depends on the ratio in the SiO2 / Fe3O4 mixture, decreasing from 85.6 to 66.1 (for example, at 17000С) with an increase in the SiO2 / Fe3O4 ratio from 0.42 to 1.25. When melting a mixture containing 70% concentrate, 11% quartzite, 19% coke, a ferroalloy containing 15-18% Si. The resulting ferroalloys are graded from FeSi15 to FeSi45.