22 March 2017 in IEEE Microwave and Wireless Components Letters
This letter demonstrates a series-inductive loading method for the directivity enhancement of microstrip coupled-line couplers. The method has an extreme structural simplicity that is based on two pairs of mutually coupled inductors. Furthermore, it shows little, if any, compromise in the performance, as verified with a 20-dB coupler at 2 GHz. Experimental results show a ±0.5-dB bandwidth of 42%, which is the widest reported for reactively loaded coupler. The demonstrated 20-dB directivity bandwidth of 147% is the highest reported for a 20-dB coupler. Most importantly, the peak directivity of 59.9 dB is the highest reported thus far, which is a clear indication of the effectiveness of the proposed method.
8 May 2012 in IEEE Transactions on Microwave Theory and Techniques
This paper demonstrates application of the popular stepped-impedance technique to control the bandwidths of dual-band filters independently. Unlike previous dual-band stepped-impedance filters, the role of the stepped-impedance technique is to control the bandwidths of the two bands rather than to provide dual-band performance. The exact relationship between stepped-impedance ratios and the ratio of the two absolute bandwidths is obtained through rigorous analysis. Moreover, since the proposed filters can be synthesized with popular transmission lines and coupled lines that are very-well characterized, time-consuming full-wave simulation can be minimized. Along with the complete set of design equations, experimental results for transmission-line and coupled-line dual-band filters are provided that verify the proposed approach.
7 February 2025 in IEEE Transactions on Antennas and Propagation
This work presents a pioneering approach that utilizes plasma as a high-loss substrate. By designing a checkerboard metasurface on the dielectric-barrier discharge (DBD) plasma substrate, the magnitude of waves reflected from the metasurface’s alternating tiles is effectively reduced. This improvement enhances tolerance to magnitude imbalance and enables more efficient destructive interference. The plasma-assisted checkerboard metasurface achieves an outstanding radar cross-section (RCS) reduction performance of up to 55.4 dB in the X-band for a plate with a 200×200 mm2 size experimentally, surpassing all previously reported methods. Theoretical analysis, simulations, and experimental findings align well, confirming the effectiveness of the proposed mechanism. This innovative use of plasma as a substrate, rather than a standalone medium, marks a significant departure from conventional plasma-based RCS reduction methods. This suggests the potential of plasma to push boundaries and create countless opportunities across a wide range of applications that can benefit from highly lossy substrates.
24 June 2019 in Journal of Electromagnetic Waves and Applications
A design method for transmission-line-based dual-band filters with completely independent passbands is demonstrated. The proposed method completely ignores the conventional restrictions imposed on the electrical lengths of the transmission lines. Consequently, each resonator is designed separately by the predetermined parameters. Unlike conventional dual-band filters, the susceptance slope parameters at two center frequencies do not need to be maintained in all sections. As a result, the proposed filter can be designed to not only have different bandwidths, but also different responses. In addition, tuning the J-inverter values increases the design’s flexibility and compensate the theoretical limitation. The experimental results for various filters verify the proposed method, including the outstanding passband insertion loss. For the first time, a filter with a Chebyshev response in one passband and a maximally flat time-delay response in the other is demonstrated in this work.
24 February 2025 in IEEE Access
This paper validates the accuracy of radar cross section (RCS) measurements conducted in an environment that significantly reduces the three main costs associated with RCS measurements: spatial costs, target under test (TUT) production costs, and the costs of constructing and maintaining an anechoic chamber. Measurement results for simple shapes that satisfy far-field conditions, such as metal spheres and metal plates, are presented. Additionally, results are provided for a geometrically complex 1/15 aircraft scale model that does not satisfy far-field conditions. The noise equivalent RCS (NERCS) of the proposed non-anechoic chamber setup is determined by measuring various sizes of metal spheres, and the RCS error over time is evaluated by measuring a metal plate continuously for 12 h in a non-temperature and humidity-controlled environment. The NERCS is found to be -43.2 dBsm. The mean RCS error for the metal plate, measured immediately after background measurement and again after 12 h, is found to be 0.005 dB and 0.220 dB, respectively. For RCS measurements of the 1/15 scale model, an image-based near-field to far-field transformation (NFFFT) algorithm is employed. The NFFFT results, including image filtering, show a mean RCS error of 5.6 dB. This error is 1.9 dB higher than previously reported results obtained in an anechoic chamber environment using an amplifier to enhance the signal-to-noise ratio (SNR). These findings can serve as guidelines for considering measurement results in a highly simplified RCS measurement setup, offering rapid feedback crucial for stealth platform design.
31 December 2021 in The Journal of Korean Institute of Electromagnetic Engineering and Science
한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)