1 March 2023 in Indonesian Journal of Electrical Engineering and Computer Science
In this work, we design a microstrip patch antenna having a dimension of 3.279x4.232 mm2 and consisting of a Foam-like substrate, of a relative dielectric permittivity of 1 and with a width of 0.5 mm, placed between two identical Rogers RT5880 substrates, having a value of 2.2 as relative dielectric permittivity, a loss tangent of 0.0009 and a height of 0.508 mm. The designed antenna resonates at 28 GHz, featuring a maximum gain of 9.77 dBi and a wide frequency bandwidth of 2.9 GHz. Compared to the conventional antenna, this proposed structure achieved an important enhancement of the directivity, with a value around 38.8°. The CST Microwave Studio software was used for all designs and analysis.
1 April 2024 in Indonesian Journal of Electrical Engineering and Computer Science
This paper introduces the design of a multiple-input-multiple-output (MIMO) antenna optimized for low-profile applications supporting sub-6 GHz fifth-generation (5G) wireless applications. We have started the design from a single antenna with a square patch shape, each antenna array is composed from 4-element radiators fed by using power dividers and quarter microstrip lines. Mounted on a single Rogers RT5880 substrate, the MIMO antenna functions at 3.5 GHz. In order to miniature and to decrease the mutual coupling between the both antennas array we have optimised a magnetic wall based on periodic structures permitting to decrease the mutual coupling between the both antenna array. The unit element from the wall was optimised, studied and validated in order to absorb the surface current and to enhance the isolation between the different radiating elements. The dimensions of the proposed MIMO antenna are 154×220×0.578 mm³. The MIMO antenna final circuit achieves a peak gain of 9 dBi and an isolation around -30 dB. The introduction of the magnetic wall permits to enhance the isolation between the antenna array from -20 dB to -30 dB at 3.5 GHz band. This advancement contributes to the overall performance improvement of the MIMO antenna system.
1 December 2024 in International Journal of Electrical and Computer Engineering (IJECE)
In this paper, we designed, analyzed, and simulated a 32-element antenna array for the sub-6 GHz band. Each radiating element is a square patch on a Rogers RT5880 substrate, featuring a relative dielectric permittivity of 2.2, a low-loss tangent of 0.0009, and a thickness of 0.508 mm, measuring 28.1×28.1 mm². Simulations were conducted using two electromagnetic solvers, advanced design system (ADS) and CST Microwave Studio, providing a comprehensive comparison of the results. To achieve a high balance between performance and antenna size, two 4×8 array antenna structures were designed. The simulations demonstrated excellent input impedance matching around 3.5 GHz for both configurations, with high gains of 20.5 dBi for the first and 18 dBi for the second configuration, along with directional radiation patterns. The dimensions were 315×576×0.578 mm³ for the first configuration and 170×961×0.578 mm³ for the second. These performance metrics make the proposed antenna arrays highly suitable for wireless communication technologies operating below 6 GHz, particularly for 5G mobile communications.
1 October 2025 in Bulletin of Electrical Engineering and Informatics
This paper introduces the design of a new frequency-reconfigurable ultra-high frequency radio frequency identification (UHF RFID) antenna, demonstrating an innovative approach that enables dynamic adjustment of its resonance frequency. The proposed antenna design features a central dipole structure, enhanced by two hexagonal split-ring resonators (H-SRR) at each end. A T-match network is integrated into the center of the dipole, which is essential for achieving impedance matching between the antenna and the Alien Gen2 H4 RFID microchip. The antenna is designed using a Rogers 4350B substrate, a high-performance dielectric material ideal for RFID applications. With dimensions of 68×32.6×1.524 mm3, the compact antenna maintains full UHF band (860 MHz to 930 MHz) coverage compliant with International Telecommunications Union (ITU) RFID standards. This ensures that the antenna can be used in different regions around the world, offering broad compatibility with various RFID systems. The antenna's frequency reconfigurability is achieved through the integration of localized capacitors with variable values, which plays a key role in enabling precise adjustments to the antenna's center frequency across the entire UHF band. Extensive simulation results validate the effectiveness of this reconfigurable design, demonstrating that the antenna can dynamically adjust its frequency while maintaining excellent performance metrics, including impedance matching, radiation efficiency, and bandwidth. This makes the proposed antenna an ideal choice for modern RFID applications.