10 May 2018 in Journal of Applied Physics
In this work, we study the optical response of structures involving porous silicon and porous alumina in a multi-layered hybrid structure. We performed a rational design of the optimal sequence necessary to produce a high transmission and selective filter, with potential applications in chemical and biosensors. The combination of these porous materials can be used to exploit its distinguishing features, i.e., high transparency of alumina and high refractive index of porous silicon. We assembled hybrid microcavities with a central porous alumina layer between two porous silicon Bragg reflectors. In this way, we constructed a Fabry-Perot resonator with high reflectivity and low absorption that improves the quality of the filter compared to a microcavity built only with porous silicon or porous alumina. We explored a simpler design in which one of the Bragg reflectors is replaced by the aluminium that remains bound to the alumina after its fabrication. We theoretically explored the potential of the proposal and its limitations when considering the roughness of the layers. We found that the quality of a microcavity made entirely with porous silicon shows a limit in the visible range due to light absorption. This limitation is overcome in the hybrid scheme, with the roughness of the layers determining the ultimate quality. Q-factors of 220 are experimentally obtained for microcavities supported on aluminium, while Q-factors around 600 are reached for microcavities with double Bragg reflectors, centred at 560 nm. This represents a four-fold increase with respect to the optimal porous silicon microcavity at this wavelength.
1 November 2021 in Sensors and Actuators A: Physical
4 October 2021 in Engineering Computations
Purpose: This work presents a topology optimization methodology for designing microarchitectures of phononic crystals. The objective is to get microstructures having, as a consequence of wave propagation phenomena in these media, bandgaps between two specified bands. An additional target is to enlarge the range of frequencies of these bandgaps.Design/methodology/approach: The resulting optimization problem is solved employing an augmented Lagrangian technique based on the proximal point methods. The main primal variable of the Lagrangian function is the characteristic function determining the spatial geometrical arrangement of different phases within the unit cell of the phononic crystal. This characteristic function is defined in terms of a level-set function. Descent directions of the Lagrangian function are evaluated by using the topological derivatives of the eigenvalues obtained through the dispersion relation of the phononic crystal.Findings: The description of the optimization algorithm is emphasized, and its intrinsic properties to attain adequate phononic crystal topologies are discussed. Particular attention is addressed to validate the analytical expressions of the topological derivative. Application examples for several cases are presented, and the numerical performance of the optimization algorithm for attaining the corresponding solutions is discussed.Originality/value: The original contribution results in the description and numerical assessment of a topology optimization algorithm using the joint concepts of the level-set function and topological derivative to design phononic crystals.
6 January 2020 in Applied Physics Letters
We have measured the temperature variation of the magnetic anisotropy of Ni nanowires (Ni NWs) embedded in freestanding porous anodized aluminum oxide membranes, using DC magnetometry and ferromagnetic resonance. Both techniques show a significant reduction of the uniaxial anisotropy with decreasing temperature. This decrease can be explained by magnetoelastic effects, as Ni NWs are subjected to stress due to the difference in thermal expansion coefficients between the nanocomposite materials. Matching our experimental findings with previously measured thermal strains along the Ni NW axis led us to estimate the perpendicular stress. Thus, we postulate the Ni NWs as nanometric differential stress sensors.
1 February 2019 in Thin Solid Films
18 March 2019 in Applied Physics Letters
We have measured the thermal expansion of Ni nanowires (NWs) electrodeposited into self-organized nanoporous amorphous aluminum oxide (AAO) membranes without an Al substrate using X-ray diffraction between 110 K and 350 K. The results indicate an average thermal expansion of the Ni NWs—along the wire axis—of . Assuming a bulk-like thermal expansion of the isolated Ni NWs, this result indicates that AAO also has a negative thermal expansion. We estimate the thermal expansion of nanoporous AAO to be . We show that data obtained previously on the thermal expansion of metallic NWs grown in the nanoporous AAO may be interpreted as originating from a negative thermal expansion of the matrix.