The paper considers the kinetics of lead ions (Pb2+) sorption from model aqueous solutions using underoxidized and overoxidized graphene oxide samples obtained from synthetic and natural (taken as comparison material) graphite. It was experimentally found that the contaminant is sorbed in the first 5 min (for the underoxidized samples) and 30 min (for the overoxidized samples), achieving a sorption capacity of 105–138 mg g–1. Moreover, the capacity of the material increases with an increase in its oxidation state. The capacity of the synthetic material is slightly higher than that of the natural one. To study the removal mechanisms and determine the process parameters, the experimental data were fitted to kinetic (pseudo-first and pseudo-second order, as well as Elovich) and diffusion (internal diffusion – Morris-Weber and external diffusion – Boyd) models. It was found that the metal sorption is controlled by mixed diffusion of the sorbate into the bulk of the sorbent. It was also determined that this process is limited by the chemical interaction between the sorbent and the sorbate and depends on the sorbate concentration and the ambient temperature. Besides, the surface morphology of the samples was studied using scanning electron microscopy, and information on their elemental composition before and after the sorption was obtained using energy dispersive spectrometry, which confirmed the mechanism of the sorption processes occurring in the systems.