1 June 2015 in Computer Methods in Applied Mechanics and Engineering
1 June 2013 in Computers & Structures
1 January 2020 in Journal of Rheology
The effects of temperature and environmental moisture on the viscoelastic behavior of polyurethane foams were investigated both theoretically and experimentally. It was shown that the effect of the environmental parameters can be explained in terms of a variation of the free volume of the solid fraction of the foams, thus allowing the use of the superposition principle to predict their influence on the viscoelastic behavior of the materials. Dynamic mechanical analyses were performed to measure the dependence on frequency, temperature, and relative humidity of the complex modulus of two different polyurethane foams, differing in terms of their glass transition temperature. The time-temperature-humidity superposition principle was proved to be applicable for the tested materials. Next, the relaxation spectra and their dependence on the relative humidity were adopted to assess its effects on the large strain behavior of the foams.The effects of temperature and environmental moisture on the viscoelastic behavior of polyurethane foams were investigated both theoretically and experimentally. It was shown that the effect of the environmental parameters can be explained in terms of a variation of the free volume of the solid fraction of the foams, thus allowing the use of the superposition principle to predict their influence on the viscoelastic behavior of the materials. Dynamic mechanical analyses were performed to measure the dependence on frequency, temperature, and relative humidity of the complex modulus of two different polyurethane foams, differing in terms of their glass transition temperature. The time-temperature-humidity superposition principle was proved to be applicable for the tested materials. Next, the relaxation spectra and their dependence on the relative humidity were adopted to assess its effects on the large strain behavior of the foams.
1 July 2012 in International Journal for Numerical Methods in Engineering
14 November 2016 in Advanced Modeling and Simulation in Engineering Sciences
In this paper, we discuss a strategy to reduce the computational costs of the simulation of dynamic fracture processes in quasi-brittle materials, based on a combination of domain decomposition (DD) and model order reduction (MOR) techniques. Fracture processes are simulated by means of three-dimensional finite element models in which use is made of cohesive elements, introduced on-the-fly wherever a cracking criterion is attained. The body is initially subdivided into sub-domains; for each sub-domain MOR is obtained through a proper orthogonal decomposition (POD) of the equations governing its evolution, until when it starts getting cracked. After crack inception within a sub-domain, the solution is switched back to the original full-order model for that sub-domain only. The computational gain attained through the coupled use of DD and POD thus depends on the geometry of the body, on the topology of sub-domains and, on top of all, on the spreading of cracking induced by load conditions. Numerical examples concerning well-established fracture tests are used for validation, and the attainable reduction of the computing time is discussed at varying decomposition into sub-domains, even in the absence of a full exploitation of parallel computing potentialities.
1 August 2013 in Advanced Materials Research
An algorithm, which combines the use of Domain Decomposition and Model Order Reduction methods based on Proper Orthogonal Decomposition, is proposed. The algorithm allows for the efficient handling of electro-mechanical coupled problems in MEMS, with a strong reduction of computing time with respect to standard monolithic or staggered solution strategies. Examples of coupled electro-mechanical problems, concerning a vibrating beam subject to variable electrostatic forces, are presented and discussed.