14 July 2017 in IEEE Transactions on Industry Applications
This paper employs grain-oriented electrical steel (GOES) in an axial-flux switched reluctance motor (AFSRM) to improve its torque characteristic, taking advantages of the material's excellent magnetic properties in the rolling direction. Based on the study on the parameter and switching characteristics of an AFSRM, GOES can be divided into pieces and arranged in the rotor and stator teeth so that the magnetic flux mainly travels along the rolling direction of the material. AFSRMs with different lamination shapes and deviation angles between the magnetic flux and rolling direction of the GOES have been studied to further improve the output performance; the maximum electromagnetic torque of the proposed design shows a 20.5% increase in comparison with that of the conventional nonoriented electrical steel motors under identical conditions. The rotor retaining ring is composed of epoxy resin lamination to constrain the rotor teeth modules. Thermal and stress analyses under fault conditions are analyzed to verify the reliability of the retaining ring. Furthermore, an AFSRM prototype is built and experiments are conducted to validate the calculated data.
27 February 2024 in IEEE Transactions on Industry Applications
In this paper, a fast evaluation of efficiency map and driving cycle efficiency of interior permanent magnet synchronous machines (IPMSMs) for electric vehicles (EVs) is proposed. Several techniques are applied to speed up the simulation process, including the iron loss and AC Joule loss calculations via static and time-harmonic magnetic simulation, efficiency map building via surface-fit and driving cycle efficiency via finite element interpolation. Moreover, an equivalent phase current angle technique is used to imitate the step-skewed simulation. As a result, compared to the commercial software, the calculation time consumption of the efficiency map and driving cycle efficiency can be reduced by 99.4% and 98.1%, respectively. It shows a great potential for the fast evaluation of the IPMSM performances. Furthermore, this fast evaluation method is combined with differential evolution algorithm to carry out a multi-mode and multi-objective optimization on an IPMSM, which will be of great benefit for the determination of the optimal traction motors for EVs. Finally, a prototype of the optimal machine is manufactured and tested to validate the precision of proposed method. The experimental results show good agreement with the results obtained by the proposed method.