This paper demonstrates a carbene stabilized precursor [Cu(tBuNHC)(hmds)] with suitable volatility, reactivity and thermal stability, that enables the spatial plasma-enhanced atomic layer deposition (APP-ALD) of copper thin films at atmospheric pressure. The resulting conductive and pure copper layers were thoroughly analysed and a comparison of precursor and process with the previously reported silver analogue [Ag(tBuNHC)(hmds)] revealed interesting similarities and notable differences in precursor chemistry and growth characteristics. This first report of APP-ALD grown copper layers is an important starting point for high throughput, low-cost manufacturing of copper films for nano- and optoelectronic devices.
24 September 2021 in Advanced Materials Interfaces
Transition metal ferrites, such as CoFe2O4 (CFO) and NiFe2O4 (NFO), have gained increasing attention as potential materials for supercapacitors. Since chemical vapor deposition (CVD) offers advantages like interface quality to the underlying substrates and the possibility for coverage of 3D substrates, two CVD processes are reported for CFO and NFO. Growth rates amount to 150 to 200 nm h−1 and yield uniform, dense, and phase pure spinel ferrite films according to X‐ray diffraction (XRD), Raman spectroscopy, Rutherford backscattering spectrometry and nuclear reaction analysis (RBS/NRA) and scanning electron microscopy (SEM). Atom probe tomography (APT) and synchrotron X‐ray photoelectron spectroscopy (XPS) give insights into the vertical homogeneity and oxidation states in the CFO films. Cation disorder of CFO is analyzed for the first time from synchrotron‐based XPS. NFO is analyzed via lab‐based XPS. Depositions on conducting Ni and Ti substrates result in electrodes with pseudocapacitive behavior, as evidenced by cyclovoltammetry (CV) experiments. The interfacial capacitances of the electrodes are up to 185 µF cm−2.
Crystalline MoS 2 thin films are deposited via MOCVD using a new molybdenum precursor, 1,4-di- tert -butyl-1,4-diazabutadienyl-bis( tert -butylimido)molybdenum( vi ) [Mo(N t Bu) 2 ( t Bu 2 DAD)], and elemental sulfur.
Nanocomposite systems based on iron(III) oxide (Fe2O3) and graphitic carbon nitride (gCN) possess a great potential as photo(electro)catalysts for environmental remediation and energy generation. In this field, a key issue is the fabrication of supported materials directly grown onto suitable substrates and possessing tailored features. In the present study, Fe2O3–gCN nanomaterials are prepared by an innovative two-step strategy, consisting of initial plasma assisted-chemical vapor deposition of iron(III) oxide on conducting glass substrates and subsequent functionalization with low amounts of gCN by a facile electrophoretic deposition process. Attention is dedicated to the use of two different forms of carbon nitride, obtained from melamine or melamine + cyanuric acid, in order to finely tune the resulting material composition. In this work, x-ray photoelectron spectroscopy was used to characterize the pristine Fe2O3 deposit as well as two Fe2O3–gCN composite materials prepared starting from different gCN powders. A detailed analysis of the obtained spectroscopic data reveals the occurrence of a direct electronic interplay between single constituents, dependent on material characteristics. The related results may act as useful guidelines for the design of photo(electro)catalysts endowed with specific properties, of importance for sustainable applications.