Mohammad Yazdi

Mohammad Yazdi

Auto-generated profile, based on publicly available information

Mohammad Yazdi

Faculty of Electrical and Computer Engineering, Babol Noshirvani University of Technology, Babol, Iran

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 March 2017 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
MYMohammad Yazdi
Mohammad Yazdi
MAMohammad Albooyeh
Mohammad Albooyeh
The theory of analytical modeling of periodic metasurfaces for normal incidence is extended to the general oblique case. The metasurface is considered as a periodic planar array with electrically small dipolar scatterers. The induced polarization currents are calculated by combining the information obtained from the response of individual scatterer to the incident wave and the interaction of scatterers with each other. All required interaction coefficients for the most general analysis of metasurfaces are analytically derived. The expressions in terms of the polarization currents are presented for the reflected/transmitted fields from metasurfaces at oblique illumination. Although theoretically known that adding normal polarization currents to the tangential ones will not provide extra degrees of freedom in the manipulation of the reflection and transmission properties of metasurfaces, in most practical applications, it is required to consider both tangential as well as normal polarization currents. Thus, the effect of oblique illumination in the modification of normal and tangential polarization currents is clarified. Our theory is used to analyze two canonical examples of bianisotropic metasurfaces composed of chiral and omega inclusions. The results of this paper provide an effective tool to push the analysis as well as the synthesis of metasurfaces one step forward.

26 July 2021 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
MRMajedehsadat Rad
Majedehsadat Rad
NNNastouh Nikkhah
Nastouh Nikkhah
BZBijan Zakeri
Bijan Zakeri
MYMohammad Yazdi
Mohammad Yazdi
In this paper, two wideband dual-polarized Dielectric Resonator Antennas (DRA) for X band radar applications are presented. The design procedure is started with designing a linear polarized DRA fed by a microstrip line. The feedline is optimized to excite the HEM11δ mode of DRA which corresponds to magnetic monopole like radiation. Then, a novel quadrature hybrid is designed in the feeding structure to provide both left (LHCP) and right-handed (RHCP) circular polarization. Finally, two antenna prototypes are fabricated and tested: a dual (right hand and left hand) circular polarization DRA with omni-directional pattern, and an enhanced gain version of dual-polarized CP DRA with a directive pattern. The measurement results of antennas confirm wideband impedance bandwidth (34% and 38.8%) as well as wideband Axial Ratio (AR) one (23% and 30%) in element and array structures, respectively. The antennas also provide both RHCP and LHCP radiation. The first antenna contains monopole-like radiation which is aimed at wireless systems with omnidirectional pattern requirements. The second, a 2*1 antenna array, which presents around 9 dB across the entire band. The presented antennas are good candidates for radar applications such as weather monitoring, air traffic control, and vehicle speed detection.

27 October 2023 in Journal of the Optical Society of America B
Verified
Journal Article
Closed access
BRBehrad Rezaee Rezavan
Behrad Rezaee Rezavan
MYMohammad Yazdi
Mohammad Yazdi
SHSeyed Ehsan Hosseininejad
Seyed Ehsan Hosseininejad
This paper presents an analytical procedure for designing orbital angular momentum (OAM) multiplexers with the capability of generating multiple multiplexed beams with different directions and OAM mode indices. The presented design method provides independent control of the power of each output OAM mode in a multiplexed beam. As a proof of concept, a metasurface with four incident beams and two multiplexed scattered beams with different directions and OAM modes is designed. It is based on a 2/2 bits phase–amplitude programmable metasurface which is numerically simulated, and the results are in good agreement with analytical predictions. The presented approach paves the way for design and implementation of multifunctional devices specially used in OAM communication systems.

1 January 2020 in Progress in Electromagnetics Research C
Verified
Journal Article
Open access
PDF file
RAReza Asgharian
Reza Asgharian
BZBijan Gatabi Zakeri
Bijan Gatabi Zakeri
MYMohammad Yazdi
Mohammad Yazdi
In this paper, an X-band, nonuniform and passive beam steering reflectarray antenna is presented. The beam steering is done with a small movement of a large element, i.e., the ground plane. The maximum ±7.5 • beam scanning from the antenna broadside is achieved by only ±0.05λ ground tilting. In the proposed structure, the beam steering capability is provided by using passive elements that eliminate the need for active biased circuits. The linearity of beam scanning as a function of ground tilting is also investigated. Compared to the previous similar works, the antenna's half-power beamwidth and side lobe level are improved by about 9 • and 20 dB, respectively. A primarily proposed reflectarray is fabricated to validate our claim.

1 April 2024 in Journal of Nanophotonics
Verified
Journal Article
Closed access
PDF file
OAOmekulsum Damavandi Asli
Omekulsum Damavandi Asli
MYMohammad Yazdi
Mohammad Yazdi
BRBehrad Rezaee Rezvan
Behrad Rezaee Rezvan
We introduced a tunable terahertz broadband absorber with near-unity absorption based on a graphene metamaterial. A periodic array of star-shaped ring graphene resonators along with a silicon dioxide substrate backed with a ground plane forms the absorbing structure. The absorption rate of the ultimate optimal absorber is more than 90% in the 0.8 to 2.4 terahertz frequency range, which is equivalent to a relative bandwidth of 100% at a central frequency of 1.6 terahertz. It is shown that the proposed structure retains its absorption bandwidth with an absorption level of more than 75% up to a 60-deg elevation angle for different wave polarizations. In addition, by increasing the chemical potential of graphene in the proposed structure from 0.1 to 0.9 eV, the absorption rate of the structure can be tuned from 40% to nearly 100%. The effects of different geometrical parameters of the structure on the absorption rate of the structure are also investigated, and the absorption mechanism of the presented absorber is investigated by interference and impedance matching theories. Finally, the simulation results are compared with calculated analytical ones, where good agreement between the results is observed. The proposed absorber has potential application in terahertz frequencies such as cloaking, modulators, tunable filters, sensors, and imaging systems.

11 October 2022 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
MHMaryam Hesari-Shermeh
Maryam Hesari-Shermeh
BABijan Abbasi Arand
Bijan Abbasi Arand
MYMohammad Yazdi
Mohammad Yazdi
Most metasurfaces are fabricated on dielectric substrates, and have found various applications in manipulating the characteristics of incident fields, from any direction that is normal or at oblique incidences. As a result, a precise analysis of substrated metasurfaces under oblique illuminations is very attractive and important. In this paper, the theory of the analytical modeling of periodic planar metasurfaces, placed on a dielectric substrate for normal incidence, is extended to general oblique cases. This method is based on an independent analysis of the electromagnetic behavior of the constituent particles, and the interactions of the particles with each other. Since the interaction coefficients are calculated analytically, this method is time effective. The reflectance and transmittance of different substrated metasurfaces under oblique incidence, which are obtained from our proposed method, are compared to the results of numerical full-wave simulations. Two different cases are considered, here a metasurface consisting of isotropic spherical particles, and a more general case of a bianisotropic metasurface composed of SRR inclusions. Good accordance has been observed between the results, confirming the accuracy of the proposed method. Furthermore, the effects of different parameters on the interaction coefficients are also investigated.