8 November 2019 in ACM Transactions on Graphics
Typical camera optics consist of a system of individual elements that are designed to compensate for the aberrations of a single lens. Recent computational cameras shift some of this correction task from the optics to post-capture processing, reducing the imaging optics to only a few optical elements. However, these systems only achieve reasonable image quality by limiting the field of view (FOV) to a few degrees - effectively ignoring severe off-axis aberrations with blur sizes of multiple hundred pixels. In this paper, we propose a lens design and learned reconstruction architecture that lift this limitation and provide an order of magnitude increase in field of view using only a single thin-plate lens element. Specifically, we design a lens to produce spatially shift-invariant point spread functions, over the full FOV, that are tailored to the proposed reconstruction architecture. We achieve this with a mixture PSF, consisting of a peak and and a low-pass component, which provides residual contrast instead of a small spot size as in traditional lens designs. To perform the reconstruction, we train a deep network on captured data from a display lab setup, eliminating the need for manual acquisition of training data in the field. We assess the proposed method in simulation and experimentally with a prototype camera system. We compare our system against existing single-element designs, including an aspherical lens and a pinhole, and we compare against a complex multielement lens, validating high-quality large field-of-view (i.e. 53°) imaging performance using only a single thin-plate element.
17 March 2020 in ACM Transactions on Graphics
Single Photon Avalanche Photodiodes (SPADs) have recently received a lot of attention in imaging and vision applications due to their excellent performance in low-light conditions, as well as their ultra-high temporal resolution. Unfortunately, like many evolving sensor technologies, image sensors built around SPAD technology currently suffer from a low pixel count. In this work, we investigate a simple, low-cost, and compact optical coding camera design that supports high-resolution image reconstructions from raw measurements with low pixel counts. We demonstrate this approach for regular intensity imaging, depth imaging, as well transient imaging. Our method uses an end-to-end framework to simultaneously optimize the optical design and a reconstruction network for obtaining super-resolved images from raw measurements. The optical design space is that of an engineered point spread function (implemented with diffractive optics), which can be considered an optimized anti-aliasing filter to preserve as much high-resolution information as possible despite imaging with a low pixel count, low fill-factor SPAD array. We further investigate a deep network for reconstruction. The effectiveness of this joint design and reconstruction approach is demonstrated for a range of different applications, including high-speed imaging, and time of flight depth imaging, as well as transient imaging. While our work specifically focuses on low-resolution SPAD sensors, similar approaches should prove effective for other emerging image sensor technologies with low pixel counts and low fill-factors.
20 November 2017 in ACM Transactions on Graphics
Computational caustics and light steering displays offer a wide range of interesting applications, ranging from art works and architectural installations to energy efficient HDR projection. In this work we expand on this concept by encoding several target images into pairs of front and rear phase-distorting surfaces. Different target holograms can be decoded by mixing and matching different front and rear surfaces under specific geometric alignments. Our approach, which we call mix-and-match holography, is made possible by moving from a refractive caustic image formation process to a diffractive, holographic one. This provides the extra bandwidth that is required to multiplex several images into pairing surfaces. We derive a detailed image formation model for the setting of holographic projection displays, as well as a multiplexing method based on a combination of phase retrieval methods and complex matrix factorization. We demonstrate several application scenarios in both simulation and physical prototypes.