In this study, a novel and simple optical fiber sensor is proposed, simulated, and experimentally demonstrated for simultaneous measurement of high refractive index (RI) and temperature. The sensor consists of a section of single-mode-silica rod-single-mode (SSRS) fiber structure cascaded to fiber Bragg grating (FBG) (SSRS-FBG). The simultaneous measurement of high RI and temperature was realized in this study by monitoring the output power level and wavelength shift of the SSRS-FBG single dip transmission spectrum corresponding to different surrounding high RI and ambient temperature values. The experimental results showed that the cascaded sensor had a sensitivity of 108.07 dBm/RIU for high RI ranging at 1.45-1.531, while the temperature sensitivity was 9.31 pm/°C from 35 °C to 85 °C. This sensor is most suitable for high RI applications, such as for monitoring oil quality stored in terminal and power transformers.
This paper reports a robust high refractive index (RI) sensor based on a multimode silica rod structure. The sensor was fabricated by splicing a segment of multimode silica rod between two single-mode fiber (SMF) leads. The measurement of high-RI is realized by monitoring the change of power spectrum caused by the reaction of leaky modes to different surrounding high-RI. The 0.5-cm long multimode silica rod sensing element exhibits a sensitivity of up to 115.12 dBm/RIU for high-RI ranging between 1.450 and 1.531. The sensor also demonstrated its potential in power transformer application by distinguishing various ageing levels of transformer oil. The leaky modes mechanism in all-silica based structure is essentially temperature insensitive, and therefore very practical to be deployed in extreme temperature conditions.
21 December 2021 in IEEE Photonics Technology Letters
A novel leaky mode coupler of multimode interference (MMI) fiber structure is proposed and experimentally demonstrated for surrounding refractive indices higher than that of silica fiber. The sensor is composed of a section of silica rod (SR) and multimode fiber (MMF) between two identical single-mode fibers (SMFs) to form a single-mode-silica rod-multimode-single-mode (SSRMS) fiber structure. In the proposed design, the SR acts as a mode coupler and a sensing element, while the MMF functions as the narrow spectral width generator. The output power at narrow spectral response of the SSRMS sensor was monitored corresponding to different surrounding high refractive indices (SHRI). The experimental results revealed that the SSRMS sensor exhibited high sensitivity up to −293.40 dB/RIU for SHRI ranging from 1.450 to 1.531. The sensor is highly suitable for SHRI applications, such as for monitoring insulation oil in a power transformer.
27 August 2013 in Measurement Science and Technology