14 January 2020 in Nature Communications
The power conversion efficiency of perovskite polycrystalline thin film solar cells has rapidly increased in recent years, while the stability still lags behind due to its low thermal stability as well as the fast ion migration along the massive grain boundaries. Here, stable and efficient lateral-structure perovskite solar cells (PSCs) are achieved based on perovskite single crystals. By optimizing anode contact with a simple surface treatment, the open circuit voltage and fill factor dramatically increase and promote the efficiency of the devices exceeding 11% (0.05 to 1 Sun) compared to that of 5.9% (0.25 Sun) of the best lateral-structure single crystal PSCs previously reported. Devices show excellent operational stability and no degradation observed after 200 h continuous operation at maximum power point under 1 Sun illumination. Devices with scalable architectures are investigated by utilizing interdigital electrodes, which show huge potential to realize low cost and highly efficient perovskite photovoltaic devices.
12 October 2021 in Advanced Materials
22 December 2022 in Nature Communications
Hybrid materials capitalize on the properties of individual materials to attain a specific combination of performance assets that is not available with the individual components alone. We describe a straightforward approach to preparation of sandwich-type hybrid dynamic materials that combine metals as electrically conductive components and polymers as bending, momentum-inducing components with flexible organic crystals as mechanically compliant and optically transducive medium. The resulting hybrid materials are conductive to both electricity and light, while they also respond to changes in temperature by deformation. Depending on the metal, their conductivity ranges from 7.9 to 21.0 S µm‒1. The elements respond rapidly to temperature by curling or uncurling in about 0.2 s, which in one typical case corresponds to exceedingly fast deformation and recovery rates of 2187.5° s‒1 and 1458.3° s‒1, respectively. In cyclic operation mode, their conductivity decreases less than 1% after 10,000 thermal cycles. The mechanothermal robustness and dual functionality favors these materials as candidates for a variety of applications in organic-based optics and electronics, and expands the prospects of application of organic crystals beyond the natural limits of their dynamic performance.
14 March 2020 in Journal of Materials Chemistry A
Doping of conjugated polyelectrolyte (PFN-Br) in MA-free perovskite resulted in a well level matching to reduce V OC loss and improve device performance, achieving a PCE of 20.32% with enhanced stability.
20 December 2024 in Science Advances
Metal halide perovskite single crystals (SCs) emerge as a promising candidate for ionizing radiation detection. The realization of top-performing radiation detectors typically relies on careful crystal selection from broad candidate groups, as residual strain remains unavoidable during the SC growth process, which often leads to the formation of ferroelastic domains with varied orientations. Here, we introduce an in-line tempering strategy to alleviate microstrain and homogenize the domain orientation across methylammonium lead iodide (MAPbI 3 ) perovskite SCs. The progressive strain relief during the phase transition in situ, demonstrated by the removal of ferroelastic domain walls, substantially enhances the crystallinity and the optoelectronic properties of the MAPbI 3 SCs. As a result, the gamma-ray energy spectrum detector leveraging these strain-relaxed SCs achieves an energy resolution of 7.2% at 59.5 keV for a 241 Am gamma-ray source, and the 25-pixel device performs highly uniformly with concentrated current distribution, which paves the way for its implementation in high-resolution radiation spectroscopy.