13 February 2023 in Physical Review Materials
Phase boundary indicates the conditions of transition between phase regions, which is a key constituent of a phase diagram. We propose an approach to determine the phase boundary and its uncertainty in a phase-composition map based on the data from high-throughput experimentation. Bayesian logistics regression combined with the domain knowledge of phase diagrams was applied in the approach. For a typical ternary isothermal section, both the linear and nonlinear phase boundaries as well as the vertices of a ternary tie triangle were modeled to quantify the uncertainty with consideration of a couple of affecting factors such as data-point density, noise in the data, data coverage, etc. The effectiveness of the present approach was demonstrated by the Fe-Cr-Ni isothermal section data from database and the Fe-Co-Ni composition-phase map data by experiment. Moreover, the uncertainty of the phase boundary in the ternary system can be further reduced by incorporating the available data from the subbinary systems. The data-driven nature of the developed approach can further guide the efficient implementation of high-throughput experiments and provide confidence measures for decision-making in materials design and further Computer Coupling of Phase Diagrams and Thermochemistry (CALPHAD) method modeling.
26 February 2024 in Materials Genome Engineering Advances
Hierarchical clustering algorithm has been applied to identify the X‐ray diffraction (XRD) patterns from a high‐throughput characterization of the combinatorial materials chips. As data quality is usually correlated with acquisition time, it is important to study the hierarchical clustering performance as a function of data quality in order to optimize the efficiency of high‐throughput experiments. This work investigated the effects of signal‐to‐noise ratio on the performance of hierarchical clustering using 29 distance metrics for the XRD patterns from Fe−Co−Ni ternary combinatorial materials chip. It is found that the clustering accuracies evaluated by the F1 score only fluctuate slightly with signal‐to‐noise ratio varying from 15.5 to 22.3 (dB) under the experimental condition. This suggests that although it may take 40–50 s to collect a visually high‐quality diffraction pattern, the measurement time could be significantly reduced to as low as 4 s without substantial loss in phase identification accuracy by hierarchical clustering. Among the 29 distance metrics, Pearson χ2 shows the highest mean F1 score of 0.77 and lowest standard deviation of 0.008. It shows that the distance matrixes calculated by Pearson χ2 are mainly controlled by the XRD peak shifting characteristics and visualized by the metric multidimensional data scaling.
1 January 2022 in SSRN Electronic Journal
Lack of experimental data, inconsistence of the dataset used as input and complexity of the model caused by the high dimensionality are all the problems lies in construction of the multicomponent phase diagram. In this context, developing new kind of approach employed for the rapid construction of the phase diagrams is essential. Here, a method based on combination of the combinatorial material science and Bayesian logistics regression is developed to construct the phase diagram under the principle of Gibbs phase rule. Relationships among the factors such as data point density, shape of the boundary, noise in the data, data coverage etc. and the uncertainty were quantitatively established. Then, the composition-phase map of the Fe-Co-Ni system at 700°C was used as an example to further demonstrate the effectiveness of the method. Besides, the problem caused by the inconsistence of the dataset used as input is solved to some degree by collaborating the binary phase diagram data available in the ASM Alloy Phase Diagram Database TM . As the probability density of the boundary determined by the newly developed approach is based on the distribution of two classes locating on both sides of the boundary, data points located far away from the boundary can be employed to estimate the behavior of the boundary and provide more reliable data for a further CALPHAD modelling, it is expected that the newly developed approach can not only accelerate the construction of the phase map, but also can guide the intelligent implementation of high-throughput experiments.