Hot-injection synthesized CsSnCl 3 nanocrystals demonstrated promising morphology, crystallinity and photocatalytic ability. By employing experimental parameters, electronic band structure was calculated with greater accuracy using DFT simulations.
Photonic curing is a large‐area, high‐throughput thermal processing technique that uses high‐intensity pulsed light to selectively cure thin films on thermally sensitive substrates. This study employs 3‐dimensional (3D) simulation to show, for the first time, that gate geometry significantly impacts peak curing temperature during photonic curing. The simulation results are experimentally validated by photonically curing solution‐processed indium zinc oxide for thin‐film transistors with different bottom gate geometries and comparing their performance to thermally annealed control devices. Under the same photonic curing pulse, for a fixed aspect ratio, peak photonic curing temperature increases with larger gate area, while for a fixed area, peak photonic curing temperature decreases with increasing aspect ratio. For different gate areas and aspect ratios, the simulated peak photonic curing temperature varies from ≈200 to 450 °C, which strongly impacts metal‐hydroxide to metal‐oxide conversion in sol–gels. Thus, the subsequent transistor performance is strongly influenced by the gate geometry. For example, for increasing gate area with fixed aspect ratio of 1, the average mobility increases from 1.61 to 12.52 cm 2 V −1 s −1 , while the threshold voltage decreases from 2.14 to −5.68 V. Thus, this study provides valuable insights for adopting 3D simulation to design transistors for complex large‐area electronics using photonic curing.
23 August 2021 in Journal of the Optical Society of America B
We report a refractive index sensor comprising a unique T-grating on top of periodic nano-cavities. The sensor has two resonant modes sensitive to different regions of the structure with low inter-region interference, hence allowing simultaneous detection of two different analytes or more accurate detection of a single analyte. The sensor also provides a self-referencing feature for a broad range of refractive indices, from 1.3 to 1.5. Using the finite difference time domain method, sensitivities of 801.7 nm and 1386.8 nm were recorded for the two modes. The versatility of the structure makes the sensor a prominent candidate for biochemical and other sensing applications.