29 March 2024 in ACS Omega
Edible oil is essential for people’s daily life but also results in a large amount of oily wastewater simultaneously. Oil–water separation is a practical route that can not only purify wastewater but also recycle valuable edible oil. In this study, the superhydrophobic copper mesh (SCM) was prepared by chemical etching, and a novel oil–water centrifugal device was designed for high-efficiency separation of edible oil wastewater. The kernel is a self-prepared SCM, which has a water contact angle (WCA) of 155.1 ± 1.8° and an oil contact angle (OCA) of 0°. Besides, the separation performance of the SCM for edible oil–water mixtures was studied in this study. The results showed that the SCM exhibited excellent oil/water separation performance, with a separation efficiency of up to 96.7% for sunflower seed oil–water wastewater, 93.3% for corn oil–water wastewater, and 98.3% for peanut oil–water wastewater, respectively. Moreover, the separation efficiency was still over 90% after 18 cycles. A model was established to analyze the oil–water separation mechanism via centrifugation. The oil–water centrifugal separation device has great potential for scale-up applications.
10 February 2025 in Journal of Electronic Materials
1 March 2025 in Russian Journal of Physical Chemistry A
The energy crisis and environmental pollution have made the development of highly efficient oxygen reduction reaction (ORR) electrocatalysts a research priority to improve fuel cell performance. A simple one-pot hydrothermal method was successfully used to synthesize the Fe3O4@MnO2/NC composite material, and the performance of catalyst was enhanced by adjusting the molar ratio of Fe–Mn and the addition of coconut shell carbon (CSC). The characterization results show that the Fe3O4@MnO2/NC with core–shell structure has a high specific surface area (751 m2 g–1) and provides abundant active sites for ORR. The electrochemical test results show that Fe3O4@MnO2/NC exhibits a superior ORR activity among the as-prepared catalysts due to strong interfacial coupling interaction. In addition, it also has a high specific capacitance, a small Tafel slope, and the lowest impedance in ORR. This not only verifies its excellent performance, but also provides a new approach and idea for developing non-precious metal ORR catalysts.
11 January 2025 in Chemical Physics Letters
27 April 2026 in SSRN Electronic Journal
The deposition of crystals on substrates poses a major obstacle to the extensive application of cooling crystallization desalination technology, as it leads to increase in energy consumption and operating costs. Extending the induction period of crystallization is key to inhibiting the adhesion and scaling of crystal grains on the substrates. In this study, a low-surface-energy superhydrophobic copper (Cu) substrate was fabricated using 1-dodecanethiol (C12H26S). Combined with density functional theory (DFT), it further elucidates surface modification mechanism at the atomic scale, revealing a charge transfer of 0.23 electrons between Cu atoms in the CuO layer and S atoms in C12H26S, which leads to the formation of chemical bond. More importantly, this work firstly proposes a quantitative model that correlates the induction period of crystal deposition as a function of the surface energy of Cu substrate and the supersaturation of the solution. The validity of the model is experimentally confirmed by measuring induction periods of crystal deposition in Na2SO4, KNO3 and LiBr solutions, which indicates that lower surface energy of substrate and lower solution supersaturation can effectively prolong induction period of crystal deposition and inhibit surface scaling, thereby providing a theoretical basis for the anti-scaling application of superhydrophobic substrates.
26 June 2026 in Applied Surface Science