A novel process is developed for high-volume production of low-cost graphene materials from any solid carbon resources, especially biomass sources. Few-layer graphene materials from solid carbon resources are produced through a molecular cracking and welding (MCW) method. The MCW technique is a single step process with two stages, i.e., graphene-encapsulated core–shell nanoparticles are first formed by catalytic thermal treatment of solid carbon materials. Then in the second stage these core–shell structures are opened by ‘cracking molecules’, and the cracked graphene shells are self-welded and reconstructed to form high quality multilayer graphene materials at a heating temperature with selected welding reagent gases. This novel graphene material with super hydrophobic properties can be used to filter water from crude oil emulsions in the petroleum industry.
The cellulose nanofibril material utilized in structural composites has attracted considerable attention in recent decades. However, developing and manufacturing such products are still somewhat problematic. In this research, cellulose nanofibril aerogel and epoxy/cellulose nanofibril composite foam with different epoxy weight ratios have been developed to make structural insulated panels. A batch of small-scale samples was used to investigate the mechanical properties and characteristics of structural insulated panels with different cellulose nanofibril-based core materials. The morphology showed that the epoxy uniformly encapsulated the cellulose nanofibril fiber walls, and the cellulose nanofibrils were the critical components to form a three-dimensional framework. The ratio of epoxy and cellulose nanofibril in these composite foams had a noticeable effect on their mechanical properties. Moreover, the thermal conductivities for pure cellulose nanofibril, epoxy/CNF10, and epoxy/CNF5 samples were 0.034, 0.045, and 0.050 W/mK, respectively. These thermal values are in the similar range of commercial insulated foam in current use.