Shanghai Key Laboratory of Multidimensional Information Processing, School of Communication and Electronic Engineering, East China Normal University, Shanghai, China
Auto-generated profile, based on publicly available information
Dingding Liang
Shanghai Key Laboratory of Multidimensional Information Processing, School of Communication and Electronic Engineering, East China Normal University, Shanghai, China
A photonic-assisted multi-functional radar system for simultaneous distance and velocity measurement and high-resolution microwave imaging is proposed and experimentally demonstrated by using a composite transmitted microwave signal of a single-chirped linearly frequency-modulated (LFM) signal and a single-tone microwave signal. In the system, the transmitted signal is generated via photonic frequency up-conversion based on a single integrated dual-polarization dual-parallel Mach-Zehnder modulator (DPol-DPMZM), while the echo signals scattered from the target are de-chirped to two low-frequency signals using a microwave photonic frequency mixer. By using the two low-frequency de-chirped signals, the real-time distance and radial velocity of the moving target can be measured accurately according to the round-trip time of the echo signal and its Doppler frequency shift. Compared with the previously reported distance and velocity measurement methods, where two LFM signals with opposite chirps are used, these parameters can be obtained using only a single-chirped LFM signal and a single-tone microwave signal. Meanwhile, high-resolution inverse synthetic aperture radar (ISAR) imaging can also be realized using ISAR imaging algorithm. An experiment is performed to verify the proposed multi-functional microwave photonic radar system. An up-chirped LFM signal from 8.5 to 12.5 GHz and an 8.0 GHz single-tone microwave signal are used as the transmitted signal. The results show that the absolute measurement errors of distance and radial velocity are less than 5.9 cm and 2.8 cm/s, respectively. ISAR imaging results are also demonstrated, which proves the high-resolution and real-time ISAR imaging ability of the proposed system.
4 February 2021 in IEEE Photonics Technology Letters
A photonics-based approach for multi-band linearly frequency-modulated (LFM) signal generation is proposed and demonstrated by using a dual-parallel Mach-Zehnder modulator (DP-MZM) injected by a dual-band LFM signal with opposite chirp rates. The dual-band LFM signal is applied to the DP-MZM that is biased as a frequency quadrupler via a 90° hybrid coupler. The 1st-order and the 2nd-order optical sidebands of the dual-band LFM signal, as well as two single-tone optical sidebands, are generated at the output of the DP-MZM due to the nonlinearity of the modulator and the non-ideal bias condition. After the optical signal from the DP-MZM is detected in a photodetector, multi-band LFM signals with multiplied bandwidth are generated. The generation of the two single-tone optical sidebands from the dual-band LFM signal greatly increases the number of the generated LFM signals. An experiment is conducted to verify the approach. Eight LFM signals up to 27 GHz in different frequency bands are simultaneously generated. The performance of the multi-band LFM signal including frequency recovery and pulse compression capability is also verified.
A photonics-based leakage cancellation and echo signal de-chirping approach for frequency-modulated continuous-wave radar systems is proposed based on a dual-drive Mach–Zehnder modulator (DD-MZM). The de-chirp reference signal and the leakage cancellation reference signal are combined and applied to the upper arm of the DD-MZM, while the received signal, including the leakage signal and echo signals, is applied to the lower arm of the DD-MZM. When the amplitudes and delays of the leakage cancellation reference signal and the leakage signal are precisely matched, the leakage signal is canceled in the optical domain. The de-chirped signal is obtained after the leakage-free optical signal is detected in a photodetector. An experiment is performed. The cancellation depth of the leakage signal after de-chirping is around 23 dB when the center frequency and bandwidth of the linearly frequency-modulated signal are 11.5 and 2 GHz, respectively. When the leakage cancellation is not employed, the leakage will seriously affect the imaging results and distance measurement accuracy. When the leakage cancellation is enabled, the imaging results of multiple targets can be clearly distinguished, the distance measurement error of a moving target is significantly reduced to less than 10 cm, and a dynamic range increase of 21 dB is achieved.
With the rapid development of wearable health monitoring technology, the integration of simultaneous multimodal physiological signal monitoring and voice interaction has emerged as a critical research frontier in smart healthcare and human-computer interaction. Fiber Bragg grating (FBG) sensing technology offers innovative solutions for wearable health monitoring due to its advantages of high sensitivity, electromagnetic immunity, and biocompatibility. In this work, a contact multimodal physiological monitoring system based on FBG laryngeal sensing is proposed. The system converts the micro-displacements of the laryngeal skin induced by physiological activities, such as respiration, heartbeat, and vocalization, into the intensity variations of FBG reflection spectra, which are subsequently mapped into the fluctuations of the electrical signal amplitude. By analyzing the electrical signal, physiological parameters, including respiratory rate and heartbeat rate, can be resolved, and reconstructed speech signals can also be derived. In addition, a dual-channel feature fusion convolutional neural network (CNN) model adapted to the FBG laryngeal sensing system is further constructed to enable efficient speech recognition. A concept verification experiment is carried out. The maximum absolute measurement errors of respiratory and heartbeat rates are 1 respiration per minute and 2 beats per minute, respectively, during a monitoring time of 60 s. Concurrently, the average recognition accuracy of the proposed fusion model reaches 96.38% in a speech recognition task with 20 words.
14 February 2025 in IEEE Internet of Things Journal
The integration of multidimensional sensing, including target sensing, spectrum sensing, and environmental parameter sensing, with wireless communication represents a pressing need for information discovery, interaction, intelligent decision-making, and automation in the future interconnected world of everything. In this work, a microwave photonic approach incorporating multidimensional sensing and communication is proposed based on polarization multiplexing and frequency-to-time mapping. The ±2nd-order frequency-sweep optical sidebands from a dual-parallel Mach-Zehnder modulator are shared between two orthogonal polarizations of a dual-polarization Mach-Zehnder modulator: One polarization state realizes the generation of joint radar and communication signals by loading baseband data to support both radar and communication functions; the other polarization state achieves transverse load sensing in conjunction with a phase-shifted fiber Bragg grating, while also possessing the capability for frequency measurement. The concept is experimentally verified. An amplitude-shift keying linearly frequency-modulated signal is generated from one polarization state, supporting 2-Gbit/s wireless communication and 4.8-cm radar ranging resolution; the other polarization state achieves a maximum mean weight measurement error of less than $2.4\times 10{^{-}3 }$ N.