14 October 2022 in Acta Materialia
10 February 2023 in Journal of Materials Research
We address the effect of elastic inhomogeneity on elastic modulus and hardness determinations made by depth-sensing indentations performed on individual particles embedded within a matrix of different elastic modulus. Finite element simulations and nanoindentation experiments are used to quantify the consequences of particle/matrix elastic inhomogeneity and we propose an adaptation of the Oliver–Pharr method that gives access to particle properties knowing those of the matrix. The method is suitable for any combination of matrix and particle elastic modulus and for any type of indenter, provided that the area of the tested particles along the surface of the sample is measured and that a large number of particles are probed. Further conditions for the implementation of the method are that testing conditions be such (i) that permanent deformation of the matrix is avoided, and (ii) that permanent deformation in each probed particle under the indenter is not affected by the matrix. Graphical abstract
14 September 2024 in Acta Materialia
6 November 2023 in Acta Materialia
27 February 2024 in Metallurgical and Materials Transactions A
JSJonathan Aristya Setyadji
Jonathan Aristya Setyadji
DHDavid Hernández-Escobar
Oxide inclusions appear in steel as a subproduct of steelmaking. These are generally detrimental to alloy properties; however, variations exist in the extent to which different inclusions are harmful because their properties vary as a function of their chemical composition. We use nanoindentation to measure the local elastic modulus and hardness of individual oxide particles, produced by precipitation within liquid iron, that belong to the systems Al2O3–SiO2–CaO and MnO–SiO2–FeO. Measured inclusion hardness values are typically in the range of 8 to 13 GPa and can reach 26 GPa for alumina-rich inclusions. Calcium aluminates rich in alumina are significantly stiffer than iron, with elastic moduli that can reach 350 GPa. On the contrary, calcium aluminates that are expected as a result of successful calcium treatment (i.e., with less than about 80 wt pct Al2O3 content) have elastic moduli below that of iron. This is also the case for the wide range of calcium aluminosilicates and of manganese silicates studied here. In addition, silicates containing about 70 to 80 wt pct MnO are observed to have a fine multiphase structure and an elastic modulus of ≈ 180 GPa. Those inclusions thus emerge as possible candidates if one aims to minimise, in loaded steel, stress concentrations associated with matrix-inclusion elastic mismatch.
23 June 2025 in Acta Materialia