1 January 2018 in Advances in Materials Science and Engineering
The mechanical, mesodamage, and the microproperties of cement‐emulsified asphalt concrete have been investigated by computed tomography (CT), scanning electron microscopy (SEM), X‐ray diffraction (XRD), and thermogravimetric analysis (TG) in this work. Emulsified asphalt delayed the hydration of cement, making the early compressive strength of concrete develop slowly. However, the concrete compressive strength increased rapidly with the demulsification of emulsified asphalt. The damage stages of condense, expansion of volume, rapid crack propagation, and damage by real‐time scanning have been observed. The CT mean value of the place near the lower end face suffered a larger decline but a smaller decline to the upper part of the sample. The evolution of concrete suffering damage to failure is a gradual development process, and no sharp expansion of brittle failure. The unhydrated cement, incorporation asphalt, fibrous C–S–H gel, CH, needle‐shaped ettringite, and other hydration products were interwoven to constitute emulsified asphalt‐cement paste, forming a spatial structure.
15 November 2019 in Journal of Nanomaterials
A simple two-step method of growing ZnO nanorod arrays on the surface of BiOI nanosheets was developed under mild environment. The hierarchical structure of ZnO arrays@BiOI nanosheets was characterized by various measurements like X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray detector. The optical absorption of the ZnO arrays@BiOI nanosheets composite was investigated by UV-Vis diffuse reflectance spectra. The photocatalytic degradation of methanol orange under visible light shows that the obtained ZnO arrays@BiOI nanosheets heterostructures exhibit enhanced photocatalytic activity, contrasting to the sum of BiOI nanosheets and ZnO nanorods. The mechanism of the photocatalytic process was discussed. This method of growing ZnO nanorod arrays on other nanosheets also provides a potential method to fabricating other complex structures.