We present a basic principle and good practices of the rheology of polymers, particularly for teachers or lecturers at colleges or universities for educational purposes, as well as for beginner researchers who may refer to this article as their self-learning resources. Basic consideration of the experimental methods using parallel-plate oscillatory rheometer and step-by-step guidelines for the estimation of the power law dependence of storage,G′ and loss,G″ modulus as well as the estimation of the relaxation time at f cross G ′ − G ′′ ${f}_{\,\mathrm{cross}}^{\,{G}^{\prime }-{G}^{\prime \prime }}$ at terminal zone using various approaches such as commercial graphical software, manual graphical approach and commercial rheometer software are highlighted. Good practices for data interpretation using different approaches are described and compared where the outcomes revealed the manual graphical approach or commercial graphical software yield comparable results with the commercial rheometer software. In order to have better insight, several examples and exercises which are applicable for teaching and self-learning activities are also provided.
Thin films of poly(ethylene oxide) (PEO) and polyacrylate (PAc) blend and the composite PEO/PAc/lithium perchlorate (LiClO4) are prepared via solution casting method. Thermal analysis using differential scanning calorimetry depicts that both the PEO/PAc blend and the PEO/PAc/LiClO4 composite form single phase systems, as evident from the presence of single composition-dependant glass transition temperature (Tg). Polarized optical microscopy (POM) was applied to study the spherulite growth rate and morphology of PEO in both the PEO/PAc blend and PEO/PAc/LiClO4 composite. Homogeneity in the phase behaviour of the PEO/PAc blend and the PEO/PAc/LiClO4 composite is reaffirmed by the continuous suppression of the growth rate and the severe deformation and coarseness of the PEO spherulite with ascending PAc content in the blend and increasing LiClO4 concentration in the composite. Additionally, the amount of salt that causes macro-phase separation in the neat polymers and the PEO/PAc blends is governed by the coordination ability of the polymer, especially PEO, to the Li+ ion. Results from both thermal analysis and POM reflect the higher preference of LiClO4 for PEO than PAc. Therefore, PEO/PAc 85/15 blend is observed to exhibit the highest capability to interact with the Li+ ion.
The influence of thermal treatment on the thermal stability, thermal properties, dielectric properties and intermolecular interaction of binary epoxidized natural rubber (ENR)-salt systems, which may be a candidate for solid polymer electrolytes (SPEs) was investigated. Solubility of salt in ENR enhances, which may be due to the disruption of the lightly-crosslinked microgel under heat treatment. The increase in the ionic conductivities of the thermally treated ENR SPEs at constant salt content is correlated to the higher glass transition temperatures, development of percolation network and higher extent of intermolecular interactions between ENR and charged entities in this study.