In order to increase the chemical stability of polybenzimidazole (PBI) membrane against the highly oxidizing environment of a vanadium redox flow battery (VRFB), PBI/Nafion hybrid membrane was developed by spray coating a Nafion ionomer onto one surface of the PBI membrane. The acid–base interaction between the sulfonic acid of the Nafion and the benzimidazole of the PBI created a stable interfacial adhesion between the Nafion layer and the PBI layer. The hybrid membrane showed an area resistance of 0.269 Ω cm2 and a very low vanadium permeability of 1.95 × 10−9 cm2 min−1. The Nafion layer protected the PBI from chemical degradation under accelerated oxidizing conditions of 1 M VO2+/5 M H2SO4, and this was subsequently examined in spectroscopic analysis. In the VRFB single cell performance test, the cell with the hybrid membrane showed better energy efficiency than the Nafion cell with 92.66% at 40 mA cm−2 and 78.1% at 100 mA cm−2 with no delamination observed between the Nafion layer and the PBI layer after the test was completed.
Reducing reliance on perfluoroalkyl substances (PFAS) in proton‐exchange membrane fuel cells requires hydrocarbon ionomers that combine high performance with long‐term durability, a persistent challenge in catalyst‐layer design. Here, we identify oxidation‐driven ionomer‐catalyst interfacial degradation as a dominant failure pathway in hydrocarbon ionomer‐bonded cathodes and introduce an adsorption‐engineering strategy to overcome this limitation. The comparison of a commercial sulfonated poly(phenylene) (Pemion) with structurally engineered sulfonated poly(fluorene)s demonstrated that electrode durability is governed by the interplay between ionomer adsorption strength and resistance to oxidative degradation on carbon‐supported Pt catalysts. A poly(fluorene) ionomer with mobile alkyl sulfonic acid groups forms resilient interfaces, delivering 1.28 A cm −2 at 0.65 V under fully humidified H 2 /air conditions (80°C and 150 kPa abs ), comparable to Pemion. After 90,000 accelerated potential cycles, the poly(fluorene)‐bonded cathode exhibits significantly improved durability, with only 29% performance loss compared to 58% for Pemion; further molecular refinement reduces the loss to 17%, approaching that of Nafion‐bonded cathodes (14%). These findings establish adsorption‐engineered ionomer design that decouples interfacial anchoring from oxidative degradation as a general strategy for achieving durable, high‐performance PFAS‐free PEM fuel cell electrodes.